RESION White Blooming Pigment

Suitable for epoxy flower effect
Including handy dosing pump
Contents: 50 grams

White Blooming Pigment is the ideal pigment to create beautiful flower effects in epoxy. Traditional pigment pastes and alcohol inks quickly sink to the bottom, which makes them unsuitable forcreating flower effects. Thanks to the unique formula of White Blooming Pigment, this does not happen, which allows you to create a beautiful flower effect in combination with Piñata Alcohol Ink. This pigment is also called 'blooming paste'.

Benefits of White Blooming Pigment

Specially developed for the 'Bloom effect' in epoxy.
Lighter than regular epoxy pigment pastes.
Easy to dose thanks to the handy pump.

Create a 3D Bloom Effect with Epoxy

RESION Blooming Pigment is easy to use, so you can easily create the 3D Bloom Effect with epoxy and alcohol ink. Follow the steps below to create the flower effect.

Make the epoxy resin by mixing components A and B in the correct ratio.
Let the epoxy rest until the resin is approximately 40°C (use a meat thermometer to measure the temperature, for example).
Pour approximately 20 grams into a new mixing cup and add one drop of White Blooming Pigment.
Pour the remaining epoxy casting resin into a silicone mould of your choice, such as a coaster mould. Preferably use RESION UV CAST25 epoxy for this.
Drop alcohol ink into the epoxy resin.
Apply the Blooming White in a circle or spiral around the alcohol ink.
Draw the desired pattern in the epoxy with a mixing spatula.
Let the epoxy harden for approximately 24 hours and carefully remove the result from the mould.

Tip: make sure you use a small quantity of pigment. The effect won't work if you use too much. Pleas wait patiently until the resin is thick enough to achieve the desired effect.

Product properties

Colour: white
Contents: 50 grams

We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.

Safety equipment

Waarschuwing

Code	Description
H317	May cause an allergic skin reaction.
P101	If medical advice is needed, have product container or label at hand.
P102	Keep out of reach of children.
P261	Avoid breathing dust/fume/gas/mist/vapours/spray.
P280	Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352	IF ON SKIN: Wash with plenty of water/…
P333+P313	If skin irritation or rash occurs: Get medical advice/attention.
P362+P364	Take off contaminated clothing and wash it before reuse.
P501B	Dispose of contents/container in accordance with in accordance with local regulation