EP101UV | UV Epoxy BASE | 100 grams
UFI: Q8J0-H03E-D005-NSVM
RESION UV Epoxy Resin (UV Cast25) is a high-quality epoxy casting resin with exceptional UV resistance and transparency. This UV resin is specially formulated to minimise long-term yellowing caused by sunlight. There is therefore no need to add a separate UV stabiliser. This makes RESION UV Epoxy Resin even easier to use and highly versatile. In addition, the improved formula increases the quality of the resin, helping it remain crystal clear for longer and offering improved resistance to yellowing.
RESION's epoxy resin has been extensively tested for UV resistance. By intensively testing the resin for an extended period in a specially developed UV chamber we can guarantee the highest quality and wide applicability. The UV-resistant resin is therefore ideal for artwork, tabletops, jewellery, countertops.

Like all other RESION resins, this epoxy resin is easy to use. Simply mix the base and hardener together according to the ratio indicated on the packaging (100:60) and make sure to stir well for 3 minutes. We also have handy taps for the jerrycans (from 8 kg sets). You can also pour the epoxy into small plastic bottles to easier dispensing. Processing RESION UV Epoxy is very simple if you follow these steps:
| Unit | Resin (EP 101UV) | Hardener (EP 121UV) |
| 160 g | 100 g | 60 g |
| 0.8 kg | 0.5 kg | 0.3 kg |
| 1.6 kg | 1 kg | 0.6 kg |
| 3.2 kg | 2 x 1 kg | 2 x 0.6 kg |
| 8 kg | 5 kg | 3 kg |
| 16 kg | 10 kg | 6 kg |
| 32 kg | 20 kg | 12 kg |
| 64 kg | 40 kg | 24 kg |
| 320 kg | 200 kg | 120 kg |
You can order RESION's UV epoxy casting resin easily at Polyestershoppen. If you order on working days before 5:00 pm CET (Central European Time), your RESION UV epoxy will be shipped the same day! Would you like more information about RESION UV epoxy resin or our other products? We are happy to advise you. Please contact us via WhatsApp, e-mail (support@polyestershoppen.com) or by phone +31 (0)85 022 0090.
The key technical properties clearly listed in one place.
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
UV stabilisation helps a material better withstand the effects of sunlight, including yellowing and deterioration of its properties. It slows ageing but does not make a resin or plastic completely resistant to UV exposure. The degree of protection varies by product.
The tasks a product is intended for, such as laminating, casting, bonding, sealing or protecting. Products intended for the same application can differ considerably in processing, curing time and final properties.
Working time is the period during which a product remains workable after mixing or activation, usually given in minutes at a specified temperature, often 20 °C. With reactive resins, the chemical reaction also continues in the mixing container, and larger quantities or higher temperatures can shorten this time. Working time is different from gel time and full curing time.
Mixing ratio indicates how much of each component is needed, for example resin (A) and hardener (B). A ratio of 100:50 by weight means 100 grams of A to 50 grams of B; by volume you might use millilitres. Weight and volume ratios are not necessarily the same because the components may have different densities. Accurate measuring is important for proper curing.
Minimum application temperature is the lowest temperature at which a product may be used according to the manufacturer. The limit can apply to the air, substrate and product itself.
At lower temperatures, resins and coatings can become thicker and cure more slowly. Moisture can also condense on a cold substrate and reduce adhesion. Check the dew point and measure the surface temperature before starting. A longer drying time does not automatically make application below the specified minimum acceptable.
At this point, the material is generally firm enough to handle carefully, move or remove from a mould. Sanding, heavier loads or extended use may require further curing.
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
Maximum casting thickness is the depth of resin that can be poured in one operation, usually in millimetres (mm) or centimetres (cm). In overly thick or large casts, heat from the reaction can build up and cause discolouration, cracking or distortion. The limit also depends on total casting volume, mould shape and temperature.
A solvent-free product contains no added solvents according to the manufacturer's specification. This does not automatically mean it is odourless, emission-free or safe to use without protective measures.
A paint or varnish layer is dust-dry when settling dust is less likely to stick to the surface. It may not yet be touch-dry, ready for overcoating or suitable for loading; these are different stages of drying and curing.
Curing time is the period a product needs to reach a specified stage of cure. It is usually given in hours or days, often at a reference temperature such as 20 °C. A product may be tack-free or safe to handle before reaching its full mechanical and chemical resistance. Film thickness and mixed quantity may also affect the time.
Viscosity measures how easily a liquid flows, or how thick it is. Dynamic viscosity is usually expressed in mPa·s (millipascal-seconds), sometimes in cP (centipoise); 1 mPa·s = 1 cP. A lower value usually means a more free-flowing liquid, while a higher value indicates a thicker product. Temperature and test method strongly affect the value. Note that mPa·s is different from MPa, which is used to express mechanical strength.
Heat resistance describes the temperature a material can withstand after correct processing and curing, usually expressed in degrees Celsius (°C). Continuous exposure is different from a brief temperature peak, and mechanical loading may also affect the limit. Heat resistance is not the same as the temperature at which the product can be applied.
Read the warnings and use appropriate protective equipment before handling the product.
UFI: Q8J0-H03E-D005-NSVM
UFI: FWA0-2011-Q00J-QHRU
Useful additions for your project.