RESION Bubble Burst
- Remove air bubbles easily
- Isopropyl alcohol spray
- Packaging: 50 ml
Want to quickly remove bubbles from epoxy? Then use RESION Bubble Burst! With the isopropyl alcohol, you can easily remove bubbles from epoxy and obtain an even more transparent result. The de-aeration spray is ideal when using epoxy in (silicone) moulds.
Why use Bubble Burst?
During the pouring of epoxy, bubbles frequently occur. You can remove these bubbles in various ways, for instance by brushing the surface with a gas burner. If you use the gas burner for too long or hold it too close to the epoxy, you risk burning the epoxy to the mould. By using RESION Bubble Burst, you eliminate the risk of damage and can remove air bubbles from epoxy very easily!
- Easily removes air bubbles from epoxy
- Does not damage epoxy
- Works very quickly
How does RESION Bubble Burst work?
RESION Bubble Burst comes in a small bottle with spray nozzle. Spray once or twice with the spray on the epoxy where there are bubbles and let it rest for a few minutes. RESION Bubble Burst works quickly and leaves no residue (residue after evaporation). If there are still air bubbles in the epoxy after application, you can spray the isopropyl alcohol over the epoxy again.
Packaging: 50 ml
Material: 98% isopropyl alcohol / isopropanol alcohol (IPA)
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
|H225||Highly flammable liquid and vapour.|
|H319||Causes serious eye irritation.|
|H336||May cause drowsiness or dizziness.|
|P101||If medical advice is needed, have product container or label at hand.|
|P102||Keep out of reach of children.|
|P264||Wash ... thoroughly after handling.|
|P280||Wear protective gloves/protective clothing/eye protection/face protection.|
|P305+P351+P338||IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.|
|P337+P313||If eye irritation persists: Get medical advice/attention.|
|P403+P235||Store in a well-ventilated place. Keep cool.|
|P501B||Dispose of contents / container in accordance with local, regional or international regulations|