Bleeder cloth
- Absorbes excess resin
- For vacuum distribution
- Strong and flexible
Bleeder cloth for absorbing excess resin and providing a good vacuum distribution. This vent cloth weighs 150 gr/m2, which is sufficient for lighter laminates (up to a combined glass weight of approximately 800 gr/m2). If you use a larger number of layers locally, simply put 2 layers of bleeder cloth on top of each other!
The bleeder cloth is easy to use, even on round shapes. The heat resistance is approx. 130 degrees.
Features
Weight: 150 gr/m2
Heat resistance: 130 °C
Dimensions
Vent cloth is available in the following packages:
- 127 cm x 5 meter (6.35 m2)
- 127 cm x 20 meter (25.4 m2)
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
