BILTEC pressure pot for resin casting
- Cures epoxy under pressure
- Removes air bubbles
- Available with compressor
BILTEC pressure pot for resin casting. The pressure inside the pressure pot reduces or even eliminates any air bubbles. This results in a higher-quality casting.
The pressure vessel is equipped with a pressure gauge to read the pressure, a pressure regulator, an overpressure valve, and a vent valve. The design of the various components ensures the pressure vessel can be used safely. The BILTEC pressure chamber is available separately or including a compressor.
Data BILTEC pressure pot
- Type designation: PS10/4P
- Internal diameter: 235 mm
- Internal height: 200 mm
- Maximum pressure: 4 bar (secured with overpressure valve)
- Hose length: 1.8 meters
- Diameter: 244 mm
- Height: approx. 225 mm
Data BILTEC compressor
- Type designation: PS9/80P
- Tank capacity: 9 litres
- Maximum boiler pressure: 10 bar
- Maximum working pressure: 8 bar
- Motor power: 550 watts
- Number of cylinders: 2
- Voltage: 230 volts
- Noise: 53-60 dB(A) (silenced)
- Gross air output: 80 litres / min
- Net air output: 55 litres / min
- Weight: 18 kg
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
