BILTEC pressure pot for resin casting
At a glance
- Cures epoxy under pressure
- Removes air bubbles
- Available with compressor
BILTEC pressure pot for resin casting. The pressure inside the pressure pot reduces or even eliminates any air bubbles. This results in a higher-quality casting.
The pressure vessel is equipped with a pressure gauge to read the pressure, a pressure regulator, an overpressure valve, and a vent valve. The design of the various components ensures the pressure vessel can be used safely. The BILTEC pressure chamber is available separately or including a compressor.
Technical data BILTEC pressure pot
- Model: PS10/4P
- Internal diameter: 235 mm
- Internal height: 200 mm
- Maximum pressure: 4 bar (secured with overpressure valve)
- Hose length: 1.8 metres
- Diameter: 244 mm
- Height: 225 mm
-
Thread: 1/4'' BSP
-
Quick connect coupling: Eurocronus quick connect coupling
-
Drain valve: 3/8'' BSP
Technical data BILTEC compressor
- Model: PS9/80P
- Tank capacity: 8 litres
- Shut-off pressure: 8 Bar
- Start pressure: 6 Bar
- Maximum working pressure: 8 bar
- Motor power: 550 W
- Rotational speed: 1,400 rpm
- Number of cylinders: 2
- Voltage: 230 volt
- Noise level: 78 dB(A) (silenced)
- Gross air delivery: 108 litres / min
- Weight: 16 kg
Product properties
The key technical properties clearly listed in one place.
- Article number
- VAC000977
-
The connection type determines whether a hose, fitting or accessory is compatible with a device. Check the size, thread or coupling system: parts with the same nominal size do not necessarily have matching connections.
- Eurocronus quick coupling
- Diameter
- 244 mm
-
The stated weight of a product or component. For liquids and powders this usually refers to the net contents, while the weight of a tool can affect how comfortable it is to use.
- 16 kg
- Height
- 225 mm
-
Airflow rate is the volume of air moved by a pump, fan or extraction system per unit of time. Common units are m³/h (cubic metres per hour) and L/min (litres per minute). Higher flow means more air movement, but filters, hoses and fittings can reduce the actual rate. Airflow rate is different from the maximum vacuum level.
- 108 L/min.
-
The electrical supply voltage required by a machine or device, expressed in volts (V). Check that it matches the socket, adapter or battery you intend to use.
- 230 V
-
Tank capacity is the volume of a reservoir, such as the tank on a compressor or cleaning machine, usually given in litres (L). On a compressor, it indicates the size of the pressure vessel, not the free air delivered per minute. For that, check the airflow rate.
- 8 L
-
Rotational speed is the number of revolutions a rotating machine or accessory makes per minute, expressed as rpm (revolutions per minute). The suitable speed depends on the task, such as mixing, sanding or polishing. Never exceed the maximum rated speed of the disc, pad or mixing attachment.
- 1.400 rpm
-
The electrical power rating of a device, expressed in watts (W). It helps estimate power consumption, but a higher wattage does not automatically mean better sanding, pumping or mixing performance.
- 550 W
-
Working pressure is the pressure at which a device or system normally operates; maximum pressure is the limit that must not be exceeded. Values are often given in bar, or sometimes kPa or MPa (1 bar = 100 kPa = 0.1 MPa). In a system with several connected components, the lowest-rated component determines the maximum permissible system pressure.
- Maximum 4 bar, Maximum 8 bar