Versachem thread sealant

- Thread lock for nuts and bolts
- Approx. 30 min. processing time
- Breakaway strength: 11 Nm
Versachem Prime Lok 245 thread sealant is an easy way to mount vacuum fittings leak-free. Leak-free mounting of threaded fittings is important to achieve a deep vacuum.
This threadseal is medium strength, so it can also be disassembled with normal tools. In addition, this thread seal from Versachem has a viscosity of 1000 mPa.s. and is hand-tight after 30 minutes.
Properties
Packaging: tube 6 ml
Colour: blue
Processing time: 10-20 minutes
Hand-tight: 30 minutes
Full cure: 24 hours
Breakaway strength: 11 Nm
Viscosity: 1000 mPa.s.
Temperature range: -55°C to +150°C
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
Safety equipment
Waarschuwing
Code | Description |
---|---|
H319 | Causes serious eye irritation. |
H335 | May cause respiratory irritation. |
P101 | If medical advice is needed, have product container or label at hand. |
P102 | Keep out of reach of children. |
P261 | Avoid breathing dust/fume/gas/mist/vapours/spray. |
P271 | Use only outdoors or in a well-ventilated area. |
P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
P312 | Call a POISON CENTER/doctor/… if you feel unwell. |
P304+P340 | IF INHALED: Remove person to fresh air and keep comfortable for breathing. |
P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
P337+P313 | If eye irritation persists: Get medical advice/attention. |
P405 | Store locked up. |
P403+P233 | Store in a well-ventilated place. Keep container tightly closed. |
P264A | Wash hands thoroughly after handling. |