LED additive for epoxy
- Makes epoxy opaque
- Gives a beautiful glow
- Electronics no longer visible
With the LED additive for epoxy, you ensure that the epoxy casting resin takes on a milky white, translucent colour. This colour allows the light from LED lighting to pass through. As a result, the individual LEDs are not visible.
Use of LED additive for epoxy
Add about 1% of this LED additive to the epoxy to ensure the epoxy takes on a nice translucent appearance.
| Epoxy | LED Additive (EP921) | Required packaging |
| 0.8 kg | 8 grams | 10 grams |
| 1.6 kg | 16 grams | 20 grams |
| 3.2 kg | 32 grams | 40 grams |
| 8 kg | 80 grams | 100 grams |
| 16 kg | 160 grams | 200 grams |
| 32 kg | 320 grams | 400 grams |
| 64 kg | 640 grams | 800 grams |
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H304 | May be fatal if swallowed and enters airways. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P331 | Do NOT induce vomiting. |
| P301+P310 | IF SWALLOWED: Immediately call a POISON CENTER/doctor/… |
| P405 | Store locked up. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
| EUH066 | Repeated exposure may cause skin dryness or cracking. |
