Farécla G3 Pro D.A. Cutting Compound

- Coarse polishing compound
- Transparent
- Verwijdert P1500 schuursporen
Farécla G3 Pro D.A. Cutting Compound is an efficient paint correction liquid that (exclusively for Farécla) uses Engineered Abrasive Technology to quickly remove surface defects. This coarse compound is suitable for Dual Action polishing (orbital). It is perfect for restoring a wide range of paint defects, from scratches and swirls to dull and oxidised paintwork. Whether you are working on a new car or an older one, the result is always a glossy, smooth surface that is ready for the next finishing step!
Features G3 Pro D.A. Cutting Compound
- Quickly removes P1500 sanding marks.
- Removes minor defects such as scratches, scuffs, swirls and holograms.
- Restores oxidised and dull paintwork.
- Clean in use, low dust and splatter.
- Ideal for manual use and to use in combination with a Dual Action polisher or rotary polisher.
- Glides and cuts evenly over the surface with little effort.
- You will see defects disappear during polishing.
Which polishing pad do I need?
You can easily use G3 Pro D.A. Cutting Compound in combination with one of the pads below:
- Original hard paint (OE): Farécla G3 Pro Microfibre Cutting Pad black (hard polishing pad)
- Original paint (OE) and repainted surfaces: Farécla G3 Pro Foam Cutting Pad blue (hard polishing pad)
Directions for use
Farécla G3 Pro D.A. Cutting Compound is easy to use. Follow the steps below for optimal results.
- Ensure surfaces are clean and cool.
- Apply a small amount to a polishing pad.
- Polish at 3,500 rpm.
- Wipe the surface clean.
- Continue with Farécla G3 Pro D.A. Fine Polish if necessary
Specifications
Contents: 500 ml, 1 litre
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.