800 gr/m2 fibreglass woven roving
- Suitable for epoxy and polyester
- Extra heavy duty glass fabric
- Approx. 1.4 mm layer thickness!
Fibreglass woven roving is a type of glass fabric for coarse work. With woven roving you can build up layer thickness very quickly. Extra heavy woven roving 800 g/m2 allows you to achieve a laminated thickness of 1.4 mm. In this way you can reach high stiffness with only a few products. Fibreglass woven roving is one of the cheaper glass fabrics and is used for processing flat or slightly curved surfaces.
The resin absorption of this fabric is approximately 1400 grams per square metre and the fabric type is suitable for use in combination with polyester resin, epoxy resin and vinylester resin.
Benefits of fibreglass woven roving
- Builds up layer thickness of 1.4 mm (!).
- Cheapest glass fabric.
- Suitable for epoxy, polyester and vinylester.
- Suitable for flat or slightly curved surfaces.
Product properties
| Application method | Layer thickness | Resin consumption |
| Hand lamination | 1.47 mm | approx. 1158 gr/m2 |
| Wet Bagging | 0.88 mm | approx. 571 gr/m2 |
| Vacuum injection | 0.58 mm | approx. 547 gr/m2 |
Weight: 800 gr/m2
Weave type: square weave
Width: 100 cm Suitable for: polyester resin, vinylester resin and epoxy resin
Packaging:
1 lm: 100 cm x 1 lm (1 m2)
5 lm: 100 cm x 5 lm (5 m2)
10 lm: 100 cm x 5 lm (10 m2), 2 pieces, folded
10 lm: 125 cm x 20 lm (10 m2), roll-packed
42 lm: 125 cm x 42 lm (approx. 42 m2), roll-packed
Supplied folded in a bag or rolled in a tube
Suitable for: floors, boat hulls, walls etc.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
