Fibreglass chopped strand mat 450 gr/m2
- 1 mm layer thickness
- Processable with Polyester resin
- For ponds and pools
Fibreglass chopped strand mat is the most commonly used reinforcement material for making laminates with the "hand lay-up" technique. The glass fibres are cross-linked and are held together by a binder. This binder dissolves in styrene (e.g. polyester resin) and can therefore take on many different shapes during lamination.
Fibreglass chopped strand mat 450 gr/m2 is most commonly used for cladding, moulded parts, swimming pools, ponds, etc.
Product properties
Surface weight: 450 gr/m2
Thickness: approx. 1 mm
Width: 125 cm
Suitable for: polyester resin and vinyl ester resin
Packaging: 1 m2, 5 m2, 20 m2, 100 m2
- 1 m2: 125 cm x 80 cm
- 5 m2: 125 cm x 400 cm
- 20 m2: 125 cm x 400 cm (4 pieces)
- 100 m2: 125 cm x 80 m (roll-packed)
Resin consumption per layer (polyester):
| 1 m2 450 gr/m2 | 1 kg polyester |
| 5 m2 450 gr/m2 | 5 kg polyester |
| 20 m2 450 gr/m2 | 20 kg polyester |
| 100 m2 450 gr/m2 | 100 kg polyester |
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
- Polyester for beginners
- Polyester pond making | DIY
- Covering an object with polyester
- The differences between glass fabric, carbon fabric and aramid fabric
- This is how you repair a polyester camper roof!
- Waterproofing walls and floors
- This is how you make polyester moulds!
- How to waterproof a wooden hot tub.
- Make a new floor for your boat with polyester
- Repairing a plastic shower tray with polyester or epoxy
- Making a boat stand
