Roof repair with WP7 Universal Roof Sealing

Do you have a leak or damage to your roof? That is of course annoying, but fortunately you can repair the roof yourself quickly and easily with Tec7 WP7 Universal Roof Sealing. The MS hybrid polymer is easy to spread and hardens quickly to form a sealing membrane with a long lifespan. It can even be applied to a slightly damp surface and it is rainproof after just two hours!


You can use WP7 Universal Roof Sealing for the following applications:

  • Sealing roof details such as penetrations, connections, transitions, edges and sides.
  • Renovation of roof elements and small flat roofs.
  • Repairing leaks in EPDM foil, lead flashings, zinc and copper work.
  • Protecting underground garden timber.

Instructions for use

We explain step by step how to use Tec7 WP7 Universal Roof Sealing and how to prepare the substrate the right way.


Step 1. Preparing the substrate

Apply WP7 to a clean and stable substrate that is free of grease and dirt. You can degrease it with acetone or Tec7 Cleaner. The substrate may be slightly damp. Rusted surfaces can be reinforced with a layer of Fixprimer.

Are you going to work on EPDM or other plastics? Then first test the adhesion. Discoloration and/or loss of adhesion may occur on bituminous materials. 

Always strengthen weak spots, connections, seams and corners in advance with Fibreglass tape. Larger surfaces can be completely reinforced with Fibreglass reinforcement mesh.

Step 2. Processing

Mix the can of WP7 well and apply the contents with a spatula or brush in 1 layer with a minimum layer thickness of 1 mm. Distribute the product evenly over the surface to be treated. Process the product between +5°C and +35°C. The consumption per mm layer thickness is 1 liter/m2.

Step 3. Cleaning materials

Clean your tools immediately with Tec7 Cleaner. After curing, you cannot clean it by hand, only mechanically. Clean your hands with RESION Cleaning Wipes.

Surplus product can be stored for a short time, provided it is sealed airtight.

Step 4. Curing

After 45 minutes, WP7 is tack-free and resistant to light rain after 2 hours. Complete curing takes 24 hours with a layer thickness of 2 mm and 72 hours with a layer thickness of 4 mm.

More technical information can be found in the technical datasheet.

More information about roof repair?

Do you still have questions after reading this article? Then contact our specialists, they are happy to help you! Also take a look at the other products we offer from Tec7. You will then have the best products for your job!

Product advisor
  • Expert advice
  • Superfast delivery with PostNL
  • Pay after delivery

Products used in this article

Product 1 of the 7

Do you have a question?

Do you have a specific question? Call one of our specialists for free advice +3185 0220090