Double Coat DD Paint Metallic
- Metallic spray paint
- Very scratch resistant
- Contents: 0.5 kg & 1 kg
Double Coat DD Paint is now also available as metallic paint!
DD Paint is a high-quality two-component polyester paint for the embellishment and protection of polyester, epoxy, metal, wood and plastic. DD Paint is known for its high scratch resistance, UV stability and long gloss retention. This makes this spray paint very suitable as a boat paint or as a scratch-resistant protection for an epoxy table. The metallic paint is available in 1 kg packages.
Features DD Paint Metallic
- Highly UV resistant.
- High scratch resistance.
- Suitable for spray application.
Processing instructions
Double Coat DD Paint is easy to use. Make sure you prepare the surface well before applying the polyester paint. Sand the surface to 280 grit and degrease with Double Coat degreaser (or Natusafe biological cleaner/degreaser. Remove dust residues with a tack cloth. Wood and metal surfaces must be prepared well. Therefore, first provide them with a suitable primer (HB coating or ZF primer).
Always wear the correct protection when using Double Coat paints. Therefore, always use a suitable vapour mask, safety goggles, gloves and protective clothing.
You can process DD Paint according to the following steps:
- Open the base component, stir it and weigh the desired amount in a clean mixing cup. Always use a (digital) scale for weighing.
- Then add the hardener in the correct ratio to the resin (67:33).
- Mix both components gently and scrape well along the side and bottom of the mixing cup. Now let the paint pre-react for 30 minutes.
- After pre-reacting, add approximately 5-10% Double Coat spray thinner to the mixture. Stir this well again.
- Apply the DD Paint evenly with a sprayer.
After 24 hours (at 20°C) you can apply a second coat without sanding. The best result is obtained by sanding between the coats and letting the penultimate coat dry for a few days. Then sand it finely with grit 400 or 600 before applying the final coat. DD Paint is dust dry after approximately 2 hours and fully cured after 5 days.
Technical properties
| Packaging | Basis | Hardener |
| 1 kg (suitable for approx. 8m2) | 670 grams | 330 grams |
Contents: 1 kg
Colour: clear
Mixing ratio: 67:33
Consumption: approx. 125 grams/m2
Processing time: approx. 2 hours
Full cure: approx. 5 days
Application: spray
Gloss: metallic
Spray thinner: 5 to 10%
Shelf life: 12 months (if stored in original packaging, in a cool, frost-free place)
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
DD lak verharder | 330 gr | Wit
Safety equipment
Waarschuwing
| Code | Description |
|---|---|
| H226 | Flammable liquid and vapour. |
| H317 | May cause an allergic skin reaction. |
| H332 | Harmful if inhaled. |
| H335 | May cause respiratory irritation. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P103 | Read label before use. |
| P210 | Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. |
| P261 | Avoid breathing dust/fume/gas/mist/vapours/spray. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P303+P361+P353 | IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. |
| P405 | Store locked up. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
