IJmopox ZF Primer


- 2-component epoxy primer
- Good rust-preventive properties
- Excellent adhesion to metal
De IJssel IJmopox ZF Primer is a two-component epoxy primer with excellent rust-preventive properties, making it ideal for use on various metals. It also adheres well to plastics and aluminum and can be used to repair hairline cracks and crazing. IJmopox ZF Primer offers outstanding mechanical strength and is easy to apply.
The IJssel ZF Primer can be overcoated with HB Coating, Double Coat, and other two-component paint systems. Before overcoating, ensure the surface is sanded, clean, and free of grease.
Benefits of IJmopox ZF Primer
- Corrosion-resistant.
- Easy to apply.
- Excellent adhesion ton a variety of plastics.
- Suitable for repairing hairline cracks and crazing
Directions for use
Follow the instructions below to apply the epoxy primer correctly:
- Clean, sand and degrease the surface.
- Wipe the surface with a tack cloth to remove the last dust. .
- Stir the base component and weigh the desired amount into a clean mixing cup.
- Add the hardener in the correct ratio to the base.
- Stir the mixture well.
- Dilute the primer as desired and application with approximately 5% IJmopox Thinner.
- Apply the primer evenly to the surface with a brush or velour roller. Roll the surface immediately, without pressing hard.
- Let the primer cure for 24 hours.
Specifications
Colour: white
Contents: 0.75 litre and 5 litre sets (base + hardener)
Mixing ratio (weight): 87:13
Mengverhouding (volume): 87:20
Application temperature: 5 - 25°C
Pot life: 8 hours (20°C)
Dust dry: after 2 hours
Recoatable: after min. 8 hours
Application: brush or roller
Thinner: IJmopox Thinner (5%)
Coverage: approx. 8.3 m2 per litre
Shelf life: 12 months unmixed in original packaging in a frost-free environment
More information about ZF Primer?
Would you like more information or advice on using IJmopox ZF Primer? Just contact our product specialists at support@polyestershoppen.com or send us a Whats App message. We're happy to help make your project a success!
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
De IJssel ZF Primer | Set | 0,75 liter
Safety equipment
Waarschuwing
Code | Description |
---|---|
H226 | Flammable liquid and vapour. |
H315 | Causes skin irritation. |
H317 | May cause an allergic skin reaction. |
H319 | Causes serious eye irritation. |
H411 | Toxic to aquatic life with long lasting effects. |
H373A | May cause damage to organs through prolonged or repeated exposure. |
P101 | If medical advice is needed, have product container or label at hand. |
P102 | Keep out of reach of children. |
P103 | Read label before use. |
P210 | Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. |
P260 | Do not breathe dust/fume/gas/mist/vapours/spray. |
P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
P303+P361+P353 | IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. |
P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
P501B | Dispose of contents/container in accordance with in accordance with local regulation |
EUH205 | Contains epoxy constituents. May produce an allergic reaction. |
- Gelcoat repair (cracks, scratches, dullness)
- This is how you repair a polyester camper roof!
- Finish metal and plastic surfaces with Double Coat DD Paint
- Fairing the boat hull below the waterline with epoxy putty
- Painting a boat with DD Paint [manual]
- Repairing boat gelcoat spider cracks
- Which primer do you need?
- Frequently asked questions about boat maintenance
- What boat primer do I need? All about boat primers!