IJmopox HB Coating
- 2-component epoxy coating
- Osmosis protection
- Resistant to salt water
IJmopox HB Coating is a low-solvent protective epoxy coating. This coating is used to protect against osmosis and corrosion on various metals and polyester. IJmopox HB Coating is resistant to many chemicals and salt water and is also often used as a primer for further finishing with DD Paint High Gloss or DD Paint Silk Gloss.
When used on wood, we recommend pre-treating the wood with Variopox Injection Resin first. For metal substrates, we recommend pre-treating the surface with IJmopox ZF Primer.
You can apply several layers of De IJssel HB coating on top of each other without sanding. If the substrate consists of a one-component paint system, it should first be removed and then roughened with sandpaper grain 120-180.
Benefits of IJmopox HB Coating
- Good protection against corrosion (steel) and osmosis (polyester).
- Good resistance to various chemicals and (salt) water.
- Directly paintable with most types of antifouling.
- Low-solvent.
- Easy to process.
Instructions for use HB Coating
Follow the instructions below to apply the epoxy coating correctly:
- Clean, sand and degrease the surface.
- Wipe the surface with a tack cloth to remove the last dust.
- Stir the base component and weigh the desired amount into a clean mixing cup.
- Add the hardener in the correct ratio to the base.
- Stir the mixture well.
- Thin the coating as desired and application with approximately 5% IJmopox thinner.
- Apply HB coating evenly to the surface with a brush or velour roller. Roll the surface immediately, without pressing hard.
Product properties
Colour: white, black and grey
Packaging: 0.75L, 4L and 20L (base + hardener)
Mixing ratio (weight): 83:17
Mixing ration (volume): 75:25
Processing temperature: 5 - 25°C
Processing time: 5 hours (20°C)
Dust dry after: 2 hours
Recoating interval: after 8 hours
Application: brush, roller or spray
Thinner: IJmopox thinner (5-10%)
Consumption: approx. 7m2 per litre
Shelf life: separate components, stored cool and dry in original packaging, minimum 12 monthsVerbruik: ca. 7m2 per liter
Houdbaarheid: 12 maanden ongemengd in originele verpakking in een vorstvrije omgeving
More information about IJmopox HB Coating?
Would you like more information or advice using IJmopox HB Coating? Then contact our specialists at support@polyestershoppen.com or send us a text message. We will be happy to help you make your project a success!
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
