Prices incl. 21% VAT. Choose your country for exact prices, shipping costs and delivery times.
International shipping
Own stock & in-house production
Expert technical advice
Supplies for professionals & industry

Araldite 2031-1 Epoxy Adhesive

View reviews
Araldite 2031-1 (50 ml)
Araldite 2031-1 Epoxy Adhesive
Araldite 2031-1

At a glance

  • Black pasty epoxy adhesive
  • For metal and carbon composite
  • Very strong adhesive bonding
Read more about this product

Not sure about your choice?

Want to know which Araldite adhesive you need? Use our selection tool!

Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops

Araldite 2031-1 is a two-component epoxy adhesive supplied as a black paste that cures at room temperature. It has been specially developed for bonding metals to composite materials. Thanks to its thixotropic properties, the adhesive remains in place and does not slump in bond lines up to 10 mm thick. This makes Araldite 2031-1 particularly suitable for the most demanding metal-to-composite bonding applications, including GRP (glass fibre reinforced plastic), CFRP (carbon fibre reinforced plastic) and SMC composites.

Tip: don't forget to order a suitable dispensing gun and the correct static mixing nozzles for ready-to-use application directly from the cartridge.

Features of Araldite 2031-1 epoxy adhesive

  • High chemical resistance.
  • Specially developed for bonding metals to composites.
  • Thixotropic (non-slump).
  • High-strength adhesive with resilient bond performance.
  • Excellent weather resistance.

Suitable applications

Araldite 2031-1 is suitable for bonding the following materials:

  • Glass fibre reinforced plastic (GRP).
  • Carbon fibre reinforced plastic (CFRP).
  • Fibre-reinforced polyester and thermoset composites.
  • Ferrous metals, aluminium and copper.

Specifications

Packaging: 50 ml dual cartridge (application gun and mixing nozzle required)
Mix ratio: 1:1
Colour: black
Specific gravity: 1.3 g/cm3
Viscosity: thixotropic paste
Pot life: 60–70 minutes
Gap-filling capability: up to 10 mm
Lap shear strength: 24 N/mm2
Peel strength: 5 N/mm2
Temperature resistance: -50°C to +80°C
Minimum curing time to achieve initial strength (1 MPa): 3 hours at 23°C
Time to achieve structural strength (10 MPa): 15 hours at 23°C (or 45 minutes at 60°C)
Application gun: application gun LS50-1 (50 ml)
Mixing nozzle: mixing nozzle A (50 ml)

Product properties

The key technical properties clearly listed in one place.

Article number
LIJ000192
Colour
Zwart
Up to 4 mm
30 tot 60 minuten
Epoxylijm
Staal, Verzinkt staal, Roestvast staal (RVS), Aluminium, Koper, Messing, Glas/Epoxy (GRE), Koolstof/Epoxy (CFRP), SMC, Keramiek, Glas, Hout
24 MPa
1.3 kg/L
Net contents
50 ml
Approximately 60-70 minutes
Thixotropic
-50 to 80 °C

Safety information

Read the warnings and use appropriate protective equipment before handling the product.

Recommended protective equipment

Hazard pictograms

Warnings and precautions

H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H411 Toxic to aquatic life with long lasting effects.
H373 May cause damage to organs through prolonged or repeated exposure.
H360F May damage fertility.
P201 Obtain special instructions before use.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash hands thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P310 Immediately call a POISON CENTER/doctor/…
P391 Collect spillage.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+P313 IF exposed or concerned: Get medical advice/attention.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

Reviews

Useful additions for your project.

Top