Double Coat DD Paint Satin Finish 7.5 kg
At a glance
- Beautiful satin finish
- UV & scratch resistant
- Good for 60m2
High-quality two-component polyester paint for embellishing and protecting polyester, epoxy, PVC, metal and wood. This two-component polyester paint is known for its non-yellowing, high scratch resistance and long gloss retention. In addition, this varnish offers long-term UV resistance.
Benefits of DD Paint Satin Finish
- High scratch resistance.
- Colour fastness.
- Long gloss retention.
- High UV resistance.
For underwater coatings, check out our boat maintenance products. Make sure you prepare the surface properly before applying the polyester paint. You can do this by sanding the surface to 280 or 320 grit and degreasing with degreaser. When using colours DC 842 (orange) and DC 845 (red), we recommend applying a base coat of ochre yellow (DC 837). Spray application is preferred and gives the most streak-free result. An alternative is Cabin Varnish, which is easy to apply with a roller or brush.
Specifications
Mixing ratio: 67 parts by weight of base and 33 parts by weight of hardener)
Coverage: approx. 125 grams/m2
Contents: 7.5 kg (for approx. 60 m2)
Application: by brush, roller or spray when using the correct spray thinner
Colours: available in various colours. Colours can also be mixed.
Gloss: satin
Pot life: approx. 2 hours
Product properties
The key technical properties clearly listed in one place.
- Article number
- LAK000294
-
Gloss level indicates how much light a dry paint or coating reflects and how the finished surface looks.
- Matt: little reflection and a subdued appearance.
- Satin: a gentle sheen between matt and high gloss.
- High gloss: stronger reflections and a more pronounced colour, although surface imperfections may become more visible.
Gloss can be measured in gloss units (GU) at a specified angle. Terms such as matt and satin do not necessarily mean exactly the same thing across manufacturers. Substrate condition and application also affect the final appearance.
- Silk gloss / Satin
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- Finish coat
-
Mixing ratio indicates how much of each component is needed, for example resin (A) and hardener (B). A ratio of 100:50 by weight means 100 grams of A to 50 grams of B; by volume you might use millilitres. Weight and volume ratios are not necessarily the same because the components may have different densities. Accurate measuring is important for proper curing.
- 67:33 (by weight)
-
Consumption or coverage describes how much product is needed for a given surface area. Consumption may be stated in g/m² or kg/m², while coverage is often given in m²/L or m²/kg. A consumption of 0.2 kg/m² means a theoretical 200 grams per square metre. Actual use depends on film thickness, substrate absorbency, application method and waste.
- Approximately 125 g/m²
- Net contents
- 7.5 kg
-
The application or processing methods specified by the manufacturer, such as brushing, rolling, spraying, casting or hand laminating. The chosen method can affect consumption, layer thickness and finish.
- Brush, Roller, Spray
-
Working time is the period during which a product remains workable after mixing or activation, usually given in minutes at a specified temperature, often 20 °C. With reactive resins, the chemical reaction also continues in the mixing container, and larger quantities or higher temperatures can shorten this time. Working time is different from gel time and full curing time.
- Approximately 2 hours
Safety information
Read the warnings and use appropriate protective equipment before handling the product.