Epifanes Bilge Paint
At a glance
- One-component bilge paint
- Wear-resistant
- Resistant to oil and gasoline
Epifanes Bilge Paint is a powerful, single-component paint that provides a durable and moisture-resistant finish in areas where water may remain standing for extended periods. Thanks to its excellent oil resistance, this paint is ideal for use in bilges, chain lockers, engine rooms, bulkheads, and similar spaces.
Benefits of Epifanes Bilge Paint
- Single-component bilge paint.
- Wear-resistant coating for bilges, storage lockers, and bulkheads.
- Chemically resistant to smoke, fuel, and oil.
Specifications
Base: modified alkyd resin
Packaging: 750 ml, 2000 ml
Colour: white, grey
Gloss: semi-gloss
Touch dry after: 3 hours (20°C)
Sandable after: 24 hours (20°C)
Recoatable after: 24 hours (20°C)
Theoretical coverage: 10m2 per litre
Density: 1270 gr/dm3
Recommended film thickness: 70 - 80 µm wet = 40 - 45 µm dry
Brush thinner: Epifanes Brush Thinner
Spray thinner: Epifanes 1C Spray Thinner
Application temperature: 10°C - 28°C
Shelf life: at least 3 years in unopened original packaging, stored between 5°C and 30°C from the date of manufacture
Product properties
The key technical properties clearly listed in one place.
- Article number
- LAK002271
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- Finish coat
-
The recommended layer thickness is the thickness at which you apply each coat of paint, coating or resin. It is usually given in micrometres (µm) or millimetres (mm).
- Wet film thickness: the thickness immediately after application.
- Dry film thickness: the thickness after drying or curing.
For a coating with 60% solids by volume, a wet film of 100 µm will theoretically produce a dry film of approximately 60 µm. Film thickness affects coverage, protection and drying. Always check whether the manufacturer specifies wet or dry film thickness.
- 70-80 µm wet (= 40-45 µm dry)
-
The recommended application temperature range indicates the conditions under which the product can generally be applied and cured properly. Three temperatures matter:
- Air: the temperature in the workshop or outdoors.
- Substrate: the temperature of the surface being treated.
- Product: the temperature of the resin, adhesive or coating itself.
A cold substrate can cause condensation and affect adhesion. At higher temperatures, two-component products may react faster, reducing their working time. Check the dew point and follow the product instructions.
- 10-28 °C
-
The chemical base describes the chemistry of an adhesive, sealant, resin or coating, such as epoxy, polyester, polyurethane, (methyl)methacrylate or a hybrid polymer. It affects curing, flexibility and adhesion. Products with the same chemical base are not necessarily suitable for the same applications.
- Modified alkyd resin
-
Density describes the mass of a material per unit volume. Values may be given in g/cm³, kg/L or kg/m³; 1 g/cm³ equals 1 kg/L. For example, one litre of a liquid with a density of 1.2 kg/L weighs approximately 1.2 kg. Density helps convert between weight and volume, but it can vary with temperature.
- 1.270 g/dm³
-
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
- At least 36 months
-
The overcoating interval tells you when the next layer of paint, varnish or coating may be applied. Many multi-coat systems specify both a minimum and a maximum interval:
- Minimum overcoating time: the previous layer is dry or cured enough to accept another coat.
- Maximum overcoating time: the period during which the next coat can bond without extra surface preparation under the stated conditions.
Overcoating too early can affect drying or the finish. Once the maximum interval has passed, cleaning and sanding may be needed to ensure adhesion between coats. Temperature and film thickness affect the waiting times.
- 1 day (20 °C)
-
The waiting time before an applied layer is dry or hard enough to sand without smearing or damage. Sanding too early can also clog the abrasive quickly. Layer thickness and temperature affect this time.
- 1 day (20 °C)
-
A paint or varnish layer is dust-dry when settling dust is less likely to stick to the surface. It may not yet be touch-dry, ready for overcoating or suitable for loading; these are different stages of drying and curing.
- 3 hours (20 °C)
-
Consumption or coverage describes how much product is needed for a given surface area. Consumption may be stated in g/m² or kg/m², while coverage is often given in m²/L or m²/kg. A consumption of 0.2 kg/m² means a theoretical 200 grams per square metre. Actual use depends on film thickness, substrate absorbency, application method and waste.
- Theoretical: 10 m²/L
-
A specific thinner that can be used, where permitted, to adjust a product's application properties or viscosity. The correct thinner and maximum quantity depend on the product. Incorrect thinning can affect coverage, drying and curing.
- Brush: Epifanes Brush Thinner, Spray: Epifanes 1C Spray Thinner
- Net contents
- 2 L, 750 ml
Reviews
Frequently bought together
Useful additions for your project.