Araldite 2018 Polyurethane Adhesive
- PU adhesive for thermoplastics
- UV resistant, transparent
- Long processing time
Araldite 2018 is a flexible polyurethane adhesive that is ideal for bonding thermoplastics. The 2-component Araldite 2018 has a long processing time and a good UV resistance.
Features Araldite 2018 Polyurethane Adhesive
- Good UV stability.
- Low shrinkage.
- Good resistance to chemicals, heat and water.
Araldite 2018 is suitable for bonding the following applications:
- (Thermo hardening) composites such as GRP/CFRP.
- Ferrous metals.
- Aluminum, copper, zinc and galvanised products.
Packaging: 200 ml double cartridge (application gun and mixing tubes required)
Application gun: handgun LS200 (200 ml)
Mixing tubes: mixing tube D (200 ml)
Specific weight: 1.1 g/cm3
Shear strength: 33 N/mm2
Peel strength: 6-8 N/mm
Temperature resistance: -60°C to +140°C
Minimum curing time for initial strength: 4.5 hours for 1 N/mm2 on aluminum at 23°C
In combination with the right application gun and suitable mixing tubes you can use Araldite 2018 instantly!
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
|H317||May cause an allergic skin reaction.|
|H332||Harmful if inhaled.|
|H335||May cause respiratory irritation.|
|H412||Harmful to aquatic life with long lasting effects.|
|P261||Avoid breathing dust/fume/gas/mist/vapours/spray.|
|P272||Contaminated work clothing should not be allowed out of the workplace.|
|P273||Avoid release to the environment.|
|P280||Wear protective gloves/protective clothing/eye protection/face protection.|
|P405||Store locked up.|
|P501B||Dispose of contents / container in accordance with local, regional or international regulations|