Polyestershoppen
International shipping
Own stock & in-house production
Expert technical advice
Supplies for professionals & industry

Araldite 2050 Methacrylate Adhesive

View reviews
Araldite 2050 (50 ml)
Araldite 2050 (380 ml)

At a glance

  • For temperatures down to -20°C
  • Application and curing underwater
  • Ultra-quick curing
Read more about this product

Not sure about your choice?

Want to know which Araldite adhesive you need? Use our selection tool!

Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops

Product description

Araldite 2050 is a fast-curing two-component methacrylate adhesive (MMA) designed for bonding thermoplastics, composites and metals. Araldite 2050 is well suited for use at low temperatures and can be used at temperatures down to -20 °C. The adhesive is also suitable for use underwater or in humid conditions.

Tip: Araldite 2050 is well suited for applications at low temperatures around and below freezing. For applications at higher temperatures, use Araldite 2051, a methacrylate adhesive with similar properties.

Features of Araldite 2050 methacrylate adhesive

  • Suitable for use in very cold conditions (down to -20 °C).
  • Suitable for application and curing underwater and in humid conditions.
  • Minimal surface preparation required.
  • Excellent ageing and weathering resistance.
  • Suitable for service temperatures up to 120 °C.
  • Ultra-fast curing.

Applications

Araldite 2050 is suitable for bonding the following materials in cold and humid environments:

  • Steel
  • Stainless steel
  • Galvanised steel
  • Aluminium
  • Copper
  • Brass
  • GRP
  • CFRP
  • SMC
  • PVC
  • ABS
  • PC
  • PMMA
  • Ceramics
  • Glass
  • Wood

Specifications

Open time: 1-2 minutes (at 25 °C)        
Mixing ratio: 1:1
Recommended application temperature: -20 °C to +25 °C
Tensile strength: 40 MPa  
Colour: off-white
Packaging:

  • 50 ml cartridge (application gun and mixing nozzles required)
  • 380 ml cartridge (application gun and mixing nozzles required)

Application gun:

Mixing nozzles:

Araldite 2050 can be applied directly using the appropriate application gun and mixing nozzle.

 

Product properties

The key technical properties clearly listed in one place.

Article number
MET000912
Adhesive type
Methyl Methacrylaatlijm
Gap-filling capacity
2mm tot 4mm
Colour
Beige
Open time
1 tot 10 minuten
Excellent adhesion to
Aluminium, Staal, Roestvast staal (RVS), Koolstof/Epoxy (CFRP), Glas/Epoxy (GRE), PVC, ABS, Polycarbonaat (PC)

Safety information

Read the warnings and use appropriate protective equipment before handling the product.

Recommended protective equipment

Hazard pictograms

Warnings and precautions

H225 Highly flammable liquid and vapour.
H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H335 May cause respiratory irritation.
H412 Harmful to aquatic life with long lasting effects.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash hands thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P310 Immediately call a POISON CENTER/doctor/…
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P370+P378 In case of fire: extinguish with extinguishing powder, CO2, alcohol-resistant foam or water spray

Reviews

Top