- Very strong bonding
- For metals and plastics
- Long processing time
Plexus MA310 is a two-component methacrylate adhesive designed for structural bonding of thermoplastic, metal and composite assemblies. Plexus MA310 is a medium curing adhesive system and has a longer processing time than Plexus MA300 Methacrylate Adhesive.
Plexus MA310 methacrylate adhesive is suitable for bonding the following substrates. Do you have any questions about bonding your application? Feel free to contact our specialists!
- FRP (glass-fibre reinforced polyester and epoxy)
- Steel, Carbon
- Polyesters (including DCPD modified)
- Vinyl Esters
- Epoxy based composites
- Stainless steel
Working time: 15-18 minutes
Fixture time: 45-55 minutes at 23°C
Specific weight: 1 g/cm³
Shear strength: 20-24 N/mm²
Viscosity: 40.000 - 70.000 mPa.s. (spleetvullend vermogen: tot 4 mm)
Operating temperature: -55°C to +121°C
- 50 ml double cartridge (application gun and mixing tubes required)
- 400 ml double cartridge (application gun and mixing tubes needed)
- Mixing tube A (50 ml)
- Plexus mixing tube (400 ml)
In combination with the right application gun and suitable mixing tubes you can use Plexus MA310 immediately!
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.