Tec7 Spray & PUR Gun Plus
At a glance
- Suitable for PU foams
- Precise dosing
- Long spray nozzle
Product description
Tec7 Spray & PUR Gun Plus is an applicator gun suitable for most PU foams aerosol cans on the market. It allows precise dispensing of PU foam, allowing you to fill joints accurately and install doors and windows quickly, easily and safely.
The Spray & PUR Gun Plus features an extra-long applicator tube, so you do not have to bend down as far and can easily reach difficult areas.
Features
- Extra-long applicator tube.
- Precise dispensing.
- Non-stick coating.
- Easy to clean.
Directions for use
Tec7 Spray & PUR Gun Plus is easy to use. Follow the instructions below:
- Check that the gun is in good working order.
- Shake the aerosol can well before use.
- Screw the aerosol can onto the applicator gun.
- Squeeze the trigger to fill the gun.
- Use the flow control screw to regulate the foam output.
Thoroughly clean both the aerosol can valve and the gun with Tec7 Spray & PUR Cleaner according to the manufacturer’s instructions. During short breaks, fully close the flow control screw. If the viscosity of the foam changes, this may indicate an inadequate seal around the needle packing. In that case, immediately remove any foam residue with Tec7 Spray & PUR Cleaner and tighten the adjustment screw using an 8 mm spanner to restore proper sealing. Check that the needle moves smoothly and apply lubricant if necessary. This helps keep the Tec7 Spray & PUR Gun Plus working properly.
Recommended products
This application gun is suitable for use with the following products:
Specifications
Gun type: PU foam applicasor gun
Material: metal and plastics
Power transmission: adjustable
Drip stop: no
Power control: no
Number of settings: 50
Product properties
The key technical properties clearly listed in one place.
- Article number
- LIJ002240