Weld Mount Tie Mount Large
- Available in black and white
- Breaking strength: approx. 70 kg
- Per piece or pack of 100
With the Weld Mount Large Tie Mount, you can easily secure cable looms, hoses and other components using a cable tie. This allows you to neatly organise wiring and water lines on board boats, as well as in cars, motorhomes and caravans, helping to prevent faults.
The Weld Mount Large Tie Mount (Weld Mount AT-5) is designed to be pressed into wet resin during lamination. In addition, this tie mount can be bonded using MMA adhesive or Tec7. The dimensions are designed to accommodate a cable tie up to 8 mm wide.
The mount offers high strength and is suitable for continuous use when submerged in water, for example in the bilge of a boat. The maximum working load is approximately 75 kg, with a breaking strength of approximately 400 kg.
Applications
- Securing cable looms.
- Fixing hoses and pipes.
- Securing various components with a cable tie.
Specifications
Colour: black or white
Dimensions: 2.6 x 1.8 cm
Packaging: per piece or per 100 pieces
Breaking strength: approx. 400 kg
Article number Weld Mount:
AT-5 (white)
AT-5B (black)
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
