- Available in all RAL colours
- Small and large packaging
- Highly colourfast pigments
Use pigments to add colour to gelcoats, topcoats, laminating resin and casting resins. These polyester pigments are highly resistant to sunlight and easy to mix with polyester, gelcoat or topcoat. This polyester pigment paste is available in all RAL colours (check the RAL colour chart).
Processing polyester pigment paste
We advise you to gradually dose and add polyester pigment paste to the resin. Then mix intensively until the resin has reached the desired colour. Lighter pigments require a higher dosage to achieve the desired colour. The video below shows how to use polyester pigment in combination with transparent polyester topcoat.
Colours: all RAL colours (see the control panel)
Quantity: 150 grams*, 1 kg or 5 kg
Application: can be used for polyester, gelcoat and topcoat
Shelf life: more than 10 years in closed packaging
Delivery timing: most colours can be delivered from stock (within a few days)
- Topcoat and gelcoat 10 to 20%
- Laminating resin (pre-colour) 3 to 5%
- Solid castings 1 to 3%
*note: due to the dosing of different colors it is difficult to mix this small quantity mechanically. For a colorfast gelcoat or topcoat, we advise to order gelcoat or topcoat in color.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.