New
FoamTack Pro Construct Starter Kit
At a glance
- Including application gun
- KOMO-certified
- Fast application and rapid curing
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
This starter kit is your first choice for the certified bonding of load-bearing and non-load-bearing structures made from dimensionally stable materials.
FoamTack Pro Construct is a KOMO-certified adhesive foam for all load-bearing and non-load-bearing constructions made of dimensionally stable materials such as calibrated quick-build blocks, sand-lime bricks (silicate blocks), aerated concrete or concrete blocks (non-load-bearing). This is a high-performance alternative to mortar or powder adhesive. With fast curing times and moisture-free application, the wall can be finished practically straight away (plastering, window installation, and more). Accelerates the work process, with no mixing required and no waiting between block layers. One can of FoamTack Pro Construct is sufficient for 10 m² of aerated concrete blocks (600 x 250 x 150 mm).
FoamTack Pro Construct is a non-shrinking adhesive foam formula that ensures optimal contact between bonded materials, even with hollow blocks. It can be applied in temperatures ranging from -10°C to +35°C. With the included Spray & PUR Cleaner, you can easily clean the gun afterwards for the next use.
Contents of the starter kit:
Benefits of the FoamTack Pro Construct Starter Kit
- Get started immediately with Cleaner and gun.
- KOMO quality mark for load-bearing walls.
- Fast application, fast curing.
- No mixing or water required.
- No waiting time between block layers.
- Stronger than mortar.
- Indoor and outdoor use.
- 1 can FoamTack Pro Construct = 160 kg of mortar = 10 m² of aerated concrete blocks.
Application
- Certified bonding of load-bearing structures made from dimensionally stable ceramic quick-build blocks, aerated concrete blocks or sand-lime bricks.
- Bonding of rigid insulation panels and other construction elements without thermal bridging.
- Installation of plasterboard, furniture panels and interior fittings on walls and frameworks.
- Installation of window sills.
- Securing of electrical flush-mounted boxes.
Specifications
Tec7 FoamTack Pro Construct
Base: polyurethane
Curing time: polymerisation through moisture (such as air moisture) within 30 minutes
Colour: grey
Skin formation (at 23°C and 50% RH) FEICA TM 1014: 6 minutes
Load-bearing (at 23°C and 50% RH): 60 minutes
Dimensional stability (FEICA TM 1004): <3% deformation
Yield: 60 m (diameter 2 cm)
Density: 22 kg/m³
Thermal conductivity (FEICA TM 1020): 0.036 W/m·K
Sound insulation: 60 dB
Shear strength: >0.9 N/mm² (concrete)
Application temperature: ambient -10°C / +35°C and product +10°C / +35°C
Temperature resistance: -40°C / +90°C; peak temperatures: -60°C / +130°C
Durability: resistant to weather, water and rot; sensitive to UV light
Shelf life: minimum 15 months in the original sealed packaging, stored upright in a cool, dry place .
Safety precautions: please consult the safety data sheet
Gun type: PU Foam
Material: metal/plastic
Power transmission: adjustable
Drip stop: no
Powercontrol: no
Number of positions: 50
Appearance (at 20°C): liquid
Vapour pressure (at 20°C): ≥ 3000 hPa
Vapour pressure (at 50°C): ≥ 8000 hPa
Relative density (at 20°C): 0.79
Water solubility: soluble
Soluble in: ethanol, ether, chloroform
Relative vapour density: > 1
Shelf life: 24 months if kept dry, cool and frost-free
Safety measures: please consult the safety datasheet
Product properties
The key technical properties clearly listed in one place.
- Article number
- POL002330
-
Shear strength indicates how much stress a bonded joint can withstand when forces try to slide the joined parts parallel to the bond line. It is usually expressed in MPa (megapascals) or N/mm² (newtons per square millimetre): 1 MPa = 1 N/mm². A value of 20 MPa therefore represents a test stress of 20 N/mm². Substrate, overlap, adhesive thickness and test conditions affect the measured strength.
- >0.9 MPa (concrete)
-
Density describes the mass of a material per unit volume. Values may be given in g/cm³, kg/L or kg/m³; 1 g/cm³ equals 1 kg/L. For example, one litre of a liquid with a density of 1.2 kg/L weighs approximately 1.2 kg. Density helps convert between weight and volume, but it can vary with temperature.
- 22 kg/m³
-
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
- 24 months, At least 15 months
-
The base material a product or part is made from, such as HDPE, aluminium, glass fibre or foam. Material choice affects weight, stiffness, chemical resistance and how the part can be worked or processed.
- Metal and plastic
-
Consumption or coverage describes how much product is needed for a given surface area. Consumption may be stated in g/m² or kg/m², while coverage is often given in m²/L or m²/kg. A consumption of 0.2 kg/m² means a theoretical 200 grams per square metre. Actual use depends on film thickness, substrate absorbency, application method and waste.
- 60 m (diameter 2 cm)
-
Heat resistance describes the temperature a material can withstand after correct processing and curing, usually expressed in degrees Celsius (°C). Continuous exposure is different from a brief temperature peak, and mechanical loading may also affect the limit. Heat resistance is not the same as the temperature at which the product can be applied.
- -40 to 90 °C (short-term: -60 to 130 °C)
Reviews
Frequently bought together
Useful additions for your project.