Acrystal Prima
- Safe and simple to use
- For laminating and casting
- Various effects possible
Acrystal Prima is a plaster-like acrylic resin consisting of a powder and a liquid (acrylic polymer). Acrystal is very similar to Jesmonite or Acrylic One. Processing the acrylic resin is very simple. Mixing the 2 components produces a hard, strong, plaster-like final product.
Acrystal can be used in all silicone moulds. So you can use the acrylic resin for beautiful coasters, figurines, large moulded pieces and much more! After just 30 minutes (depending on the temperature) you can remove the acrystal from the mould. The acrystal is fully cured after a few days. Acrystal is easy to colour with Posca markers.
Benefits of Acrystal Prima
- Non-hazardous in storage and processing.
- Fast processing (30 minutes).
- UV resistant.
- Heat resistant.
- Non-combustible.
Instructions for use of acrystal
The use of acrystal is very simple. Follow the next steps and use the mixing ratio: 1 part liquid and 2.5 parts powder (40:100)!
- Weigh the desired amount of Acrystal Prima liquid in a mixing cup.
- If desired, add acrystal retarder or acrystal pigments (optional).
- Weigh the correct amount of powder into a mixing cup.
- Add both components together and mix thoroughly for approximately 30 seconds using an acrystal mixer.
- Leave the acrystal to stand for a while to allow air bubbles to dissolve.
- The Acrystal Prima is now ready to use!
Product properties
Colour: ivory white
Processing time (without retarder): approx. 8-10 minutes (at 17-20°C)
Processing time (with retarder): approx. 90 minutes (at 17-20°C)
Minimum processing temperature: 12°C
Mixing ratio: 1 part liquid and 2.5 parts powder (40:100)
Pigments: to be coloured with pigments
Fillers: to be filled in with various fillers such as sand, marble powder, decorative gravel, etc.
UV resistance: very good
Outdoor use: possible after painting (use Acrystal Sealer for this)
| Packaging | Powder (Acrystal Basic Crystal) | Fluid (Acrystal Prima) |
| Set of 1.4 kg | 1 kg | 0.4 kg |
| Set of 3.5 kg | 2.5 kg | 1 kg |
| Set of 14 kg | 10 kg | 4 kg |
| Set of 70 kg | 50 kg | 20 kg |
Larger packages are available on request!
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
