UV Stabiliser for epoxy

Protection against yellowing
Only 1% required
Suitable for all epoxy resins

In the long term, epoxy castings may yellow due to UV radiation. Hardener forms the most important property for yellowing resistance. Hardeners like RESION Epoxy coating and RESION Epoxy resin have good UV resistance. However, we recommend using a UV blocker, especially for outdoors applications. This significantly prolongs the UV resistance of a casting.

Tip: are you looking for UV stable epoxies to which you do not need to add a UV blocker? Then use RESION UV Epoxy, Epoxy for large castings or UV Resin Art epoxies!

Benefits of UV stabiliser for epoxy

Considerably increases the UV stability of epoxy.
Easy to process.
You only need 1% stabiliser of the total weight of epoxy.

Instructions for use

Add about 1% of this UV stabiliser to the total weight of epoxy casting resin and hardener. This way you extend the UV resistance and protect the casting from discolouration by sunlight. You can mix the UV blocker into the epoxy resin beforehand or add it to the mixture after mixing.

The UV stabiliser does not affect the colour or transparency of the epoxy.

Please note: the UV stabiliser may become hard/thick due to temperature fluctuations (crystallisation). When you heat the UV stabiliser, it should liquefy and is suitable for use. If in doubt, please contact us.

Epoxy	UV Stabiliser (EP911)	Quantity needed
0.8 kg	8 grams	10 grams
1.6 kg	16 grams	20 grams
3.2 kg	32 grams	40 grams (2x 20 grams)
8 kg	80 grams	100 grams
16 kg	160 grams	200 grams (2x 100 grams)
32 kg	320 grams	400 grams
64 kg	640 grams	800 grams (2x 400 grams)

Buy UV Stabiliser for epoxy

This UV stabiliser for epoxy resin and all other epoxy products can easily be purchased online at Polyestershoppen.com. If you order on working days before 5 p.m. Dutch time, your order will be shipped the same day! Would you like more information about the UV stabiliser? Please contact us by phone: +31850220090 or send an email to support@polyestershoppen.com.

We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.

Safety equipment

Waarschuwing

Code	Description
H411	Toxic to aquatic life with long lasting effects.
H373A	May cause damage to organs through prolonged or repeated exposure.
P101	If medical advice is needed, have product container or label at hand.
P102	Keep out of reach of children.
P260	Do not breathe dust/fume/gas/mist/vapours/spray.
P273	Avoid release to the environment.
P314	Get medical advice/attention if you feel unwell.
P391	Collect spillage.
P501B	Dispose of contents/container in accordance with in accordance with local regulation