Silicone mould for Cones
- Cone mould
- Material: siliconen
- Available in 2 sizes
Make cone moulds very easily with this silicone casting mould. This mould can be used in combination with all our epoxy casting resins. The silicone mould does not adhere to the epoxy and is easy to colour with our colour pigments such as RESION MetalTint, RESION TransTint, Resi-Metal or Resi-Tint.
Tip: a spray release agent can simplify removal of the cast from the mould and extend the life of the mould.
Dimensions
- 3 x 3 cm (weight after filling with epoxy is 12 grams)
- 6 x 6 cm (weight after filling with epoxy is 75 grams)
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
