Popular
Release agent spray
At a glance
- Vaseline-based
- Simplifies unloading
- Colourless
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
Product description
Make unloading Resin Art works in silicone moulds easier and extend the life of silicone moulds with this universal unloading spray.
Spray the surfaces to be unloaded with this spray and spread with a brush or brush. Repeat the operation if necessary. The silicone will now not adhere to your Resin Art and will release easily. Please note: release agent can result in a dull mould surface, which means the end result is less high-gloss. You can of course polish the epoxy.
Benefits of release agent for silicone
- Extends the service life of silicone casts.
- Simplifies releasing.
- Vaseline-based spray.
Specifications
Suitable for: silicone, polyurethane, epoxy, polyester
Packaging: aerosol 400 grams
Consumption: approx. 25-50 gr/m2
Cure time: approx. 15 minutes
Colour: transparent
Product properties
The key technical properties clearly listed in one place.
- Article number
- RES000842
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- Accessories
-
The time needed for an applied layer to dry, for example as water or solvent evaporates. Reactive products may also undergo chemical curing. A surface that feels dry is therefore not necessarily fully cured or ready to be loaded.
- Approximately 15 minutes
-
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
- Approximately 6 months
-
Consumption or coverage describes how much product is needed for a given surface area. Consumption may be stated in g/m² or kg/m², while coverage is often given in m²/L or m²/kg. A consumption of 0.2 kg/m² means a theoretical 200 grams per square metre. Actual use depends on film thickness, substrate absorbency, application method and waste.
- Approximately 25-50 g/m²
- Net contents
- 400 g
Reviews
Frequently bought together
Useful additions for your project.
Recommended
