Motip Clear Varnish

High-gloss or matt
Scratch and impact-resistant
UV-resistant and lightfast

You can use this clear gloss lacquer to give your Resin Art artwork a high-gloss or matt finish. The gloss lacquer is available in high-gloss or matt gloss and is resistant to weather influences and UV light. You can also use this lacquer for polyester products.

Features Motip Clear Varnish

Fast-drying.
Durable gloss.
Scratch and impact-resistant.
Resistant to weather influences and UV-light.
Good corrosion resistance.
Excellent adhesion.
Heat resistant up to 110 degrees (after 1 week curing).

Application to polyester casting resin (Resin Art)

Lightly sand the surface with 320-grit or 400-grit sandpaper.
Remove dust and grease from the surface.
Apply the gloss lacquer crosswise to the epoxy.
Allow the varnish to set.

Properties

Packaging: aerosol 500 ml
Gloss: high gloss or matt

We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.

Safety equipment

Gevaar

Code	Description
H222	Extremely flammable aerosol.
H229	Pressurised container: May burst if heated.
H315	Causes skin irritation.
H318	Causes serious eye damage.
H336	May cause drowsiness or dizziness.
H412	Harmful to aquatic life with long lasting effects.
P102	Keep out of reach of children.
P210	Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211	Do not spray on an open flame or other ignition source.
P251	Do not pierce or burn, even after use.
P260	Do not breathe dust/fume/gas/mist/vapours/spray.
P410+P412	Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.
P501B	Dispose of contents/container in accordance with in accordance with local regulation