FERM Multi Tool (OTM1007)
At a glance
- Model: OTM1007
- Incl. 7 accessories
- Variable speed
Product description
With the FERM OTM1007 multi-tool, you can tackle a wide range of jobs with just one machine. Sand, saw and grind effortlessly with this oscillating multi-tool.
With a 300 W motor and a no-load speed of up to 23,000 oscillations per minute, the multi-tool provides plenty of power for a wide range of jobs. Depending on the attachment, the multi-tool can be used for various applications, including:
- Cutting profiles and working with wood, metal and plastic.
- Cutting out tongue-and-groove joints in wooden structures with the included plunge saw blade for wood and plasterboard.
- Sanding edges and corners flush.
- Cutting protruding screws and nails flush on wooden furniture, fences and doors.
Thanks to the variable speed control with 6 ettings, the speed can be precisely adjusted to suit the material being worked on. This ensures optimal results. The OTM1007 comes in a sturdy storage case for easy storage and transport of the multi-tool and its accessories.
Package contents:
- FERM OTM1007
- Storage case
- 7 attachments
Specifications
Power: 300 W
Mains voltage: 230-240 V
Frequency: 50 Hz
No-load speed: 0-23,000 /min
Weight: 2.25 kg
Dimensions: 30 x 10 x 5 cm (LxWxH)
Type: oscillating multi-tool
Product properties
The key technical properties clearly listed in one place.
- Article number
- SCH001314
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- Schuurmachine
-
The product's dimensions, usually shown as length × width × height or another product-specific order. Check whether the measurements describe the outside, inside or usable space, especially for containers and moulds.
- 30 x 10 x 5 cm
-
The stated weight of a product or component. For liquids and powders this usually refers to the net contents, while the weight of a tool can affect how comfortable it is to use.
- 2.25 kg
-
The electrical supply voltage required by a machine or device, expressed in volts (V). Check that it matches the socket, adapter or battery you intend to use.
- 230-240 V
-
Rotational speed is the number of revolutions a rotating machine or accessory makes per minute, expressed as rpm (revolutions per minute). The suitable speed depends on the task, such as mixing, sanding or polishing. Never exceed the maximum rated speed of the disc, pad or mixing attachment.
- 0-23.000 rpm
-
The electrical power rating of a device, expressed in watts (W). It helps estimate power consumption, but a higher wattage does not automatically mean better sanding, pumping or mixing performance.
- 300 W