Mirka Gold sandpaper roll (P40)
At a glance
- 40 to 240 grit
- Roll length: 50 metres
- Roll width: 115 cm
Mirka Gold is a universal sandpaper with a strong construction. It allows you to easily sand both flat and shaped surfaces. The semi-open coating prevents clogging and guarantees a high-quality surface finish. This also makes Mirka sandpaper extremely suitable for coarse finishing of polyester and epoxy.
Mirka sandpaper on a roll
Mirka sandpaper comes on a roll 50 metres long. So you always have plenty in stock to sand at any time. The roll width is 115 mm and is available in grits 40 to 240. Coarse and fine sanding, therefore, is no problem at all with this versatile sandpaper from Mirka.
Specifications
Roll length: 50 metres
Roll width: 115 mm
Grits: 40
Brand: Mirka
Type: gold
Buy easily online at Polyestershoppen.com
At Polyestershoppen.com, you can easily order Mirka sandpaper and a wide range of other sanding and polishing products online. If you place your order before 5 pm CET (Central European Time) on working days, it will be dispatched the same day. Would you like more information about one of our products? Please feel free to contact us by calling +31850220090 or by emailing support@polyestershoppen.com. You can also find answers to frequently asked questions in our information centre.
Product properties
The key technical properties clearly listed in one place.
- Article number
- SCH000995
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- Schuurpapier
-
The measurement across a product from one side to the other, for example for rolls, panels or fabrics. With rolled materials, the usable width may differ from the overall width.
- 115 mm
-
Grit size affects how much material an abrasive removes and how fine the resulting scratch pattern is. On the FEPA-P scale, the higher the P number, the finer the abrasive grit.
- P60-P80: coarse sanding, stripping old coatings or removing pronounced unevenness.
- P120-P180: further levelling and intermediate sanding.
- P240-P400: finer sanding before the next finishing stage.
- P600 and finer: very fine sanding or preparation for polishing, depending on the material.
These are general guidelines. Choose the grit based on the substrate, desired finish and instructions for the next coat. Different grit grading standards are not always directly comparable.
- P40
- Length
- 50 m