Silicone mould Cheops pyramid

Cheops' pyramid is one of the most famous pyramids. You can see the real pyramids in Egypt but with these moulds you can also make a beautiful pyramid for your home. This mould is usually used for making Orgonite, an art form involving energy, crystal, organic and inorganic substances.

This mould is a combination of a silicone insert for the Cheops moulds made of HDPE and a matching HDPE 160 mm support mould to ensure the shape of the pyramid. You can also make smaller pyramids by not filling the mould completely. The silicone mould is suitable for more than 30 releases without damaging the mould. The silicone mould has a size of 140 mm. The HDPE mould can also be used without the silicone mould.

Benefits of the silicone mould for a Cheops pyramid:

• Very easy to release (silicone does not adhere to epoxy or polyester).
• Resistant to high temperatures.
• The silicone mould has a high-gloss finish so your pyramid comes out of the mould in a high-gloss finish.
• Suitable for many releases without damaging.
• No chance of leakage in the mould.

Epoxy resin and pigments

By pouring epoxy resin into the mould, you can make your own pyramid. The most suitable resins are Resion Epoxy casting resin or MasterCast. For large moulds we recommend Resion epoxy casting resin for large castings.

These resins are suitable for combining with pigments such as Resion MetalTint, Resion TransTint, Resi-Metal or Resi-Tint. You can also choose to create cool effects with Glow in the dark powder or copper powder.

Release agent spray can simplify removing the cast from the mould and can extend mould life.

Properties

Shape: Cheops pyramid
Volume: 582 ml
Material: Platinum cure silicone FDA approved
Discharge: release agent is not necessary, if necessary use vaseline spray to be on the safe side. 
Suitable for: Resion Epoxy casting resin and Resion Epoxy casting resin for large castings
Contents of the set: 1x silicone mould 140 mm, 1x HDPE support mould 160 mm