HDPE mould Russian Pyramid
- Pyramid mould
- Available in 3 sizes
- Material: HDPE
The Russian pyramid is a higher pyramid than the Cheops pyramid. Its high pointed shape allows it to work in many layers. The shape is widely used for orgonite, an art form involving energy, crystal, organic and inorganic materials.
Use of HDPE moulds
The moulds are made of HDPE, to which epoxy will not adhere. The moulds fold open to allow easy release of the pyramid. In the video below, you can see how to easily assemble the Russian pyramid mould using tape. With the larger sizes, you can of course also make smaller pyramids, if you don't fill them all the way to the edge.
Suitable epoxy and pigment
By pouring epoxy resin into the mould, you can make your own pyramid. The most suitable resins are RESION UV Resin Art epoxy MV (medium viscosity) or MasterCast. For large moulds we recommend Resion epoxy casting resin for large castings.
These Resins are suitable for combining with pigments such as Resion MetalTint, Resion SolidTint, Resion TransTint, Resi-Metal or Resi-Tint. Other options include adding Glow-in-the-dark powder or Copper powder.
Product properties
- Shape: Russian pyramid
- Angle: 76 degrees
- Material: HDPE
- Material thickness: 5 mm
Dimensions
- 30 x 30 mm (height 62 mm, volume 19 ml)
- 60 x 60 mm (height 123 mm, volume 148 ml)
- 120 x 120 mm (height 247 mm, volume 1185 ml)
- 200 x 200 mm (height 412 mm, volume 5.488 ml)
- 300 x 300 mm (height 617 mm, volume 18.523 ml)
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
