RESION Deep Cast Epoxy Resin
- High temperature resistance
- Cast in one go up to 7.5 cm thick
- Low viscosity
Do you want to make your own table with epoxy just like in this video, or do you want to cast large objects (up to more than 10 centimeters thick) with epoxy? Then use our special RESION Deep Cast Epoxy Resin (RESION UV Cast75). This epoxy resin has a gentle cure and a very clear appearance which makes the resin ideal for, for example, a cool epoxy river table or tabletops.
Benefits of RESION Deep Cast Epoxy Resin
- Castings possible up to 75 mm thickness (at 20°C).
- Highest UV resistance on the market.
- Highly transparent end result.
- Long processing time.
- Very good de-aeration due to low viscosity.
UV resistant epoxy
The deep cast epoxy resin is highly UV resistant and will therefore not yellow in sunlight. RESION's epoxy casting resin has been extensively tested for this by intensively testing the resin for an extended period in a specially developed UV cabinet. This allows us to guarantee the highest achievable quality and wide applicability.
Processing instructions for epoxy for large castings
Follow the steps below to process this epoxy resin correctly.
- Weighing: weigh the base component (A) and the hardener (B) correctly according to the mixing ratio stated on the packaging (100 parts by weight of resin to 43 parts by weight of hardener).
- Mixing: mix the base and hardener thoroughly for 3 minutes. Preferably use a spiral mixer or epoxy mixer for this. Also scrape well along the sides and bottom of the mixing cup!
- Processing: process the epoxy resin as desired, for example by pouring it into a mold (the processing time is 180-240 minutes at 20℃).
- Curing: allow the UV-resistant epoxy to cure for approximately 10-24 hours after application before it can be handled (please note: the epoxy is only fully cured after 3-7 days).
Product properties
| Unit | Resin (EP101UV) | Hardener (EP123) | Total litres |
| 0.715 kg | 0.5 kg | 0.215 kg | 0.650 litres |
| 1.43 kg | 1 kg | 0.43 kg | 1.3 litres |
| 7.15 kg | 5 kg | 2.15 kg | 6.5 litres |
| 14.3 kg | 10 kg | 4.3 kg | 13 litres |
| 28.6 kg | 20 kg | 8.6 kg | 26 litres |
| 57.2 kg | 40 kg | 17.2 kg | 52 litres |
| 114.4 kg | 80 kg | 34.4 kg | 104 litres |
| 286 kg | 200 kg (NOTE: in a steel drum) | 86 kg | 314 litres |
Mixing ratio: 100:43 (by weight)
Viscosity (mixed): approx. 200-250 mPa.s
Pot life (500 ml at 20℃): approx. 180-240 min.
Full cure: 3-7 days
Gelling time: 10-24 hours
Heat resistance: 40-45℃
Colour: transparent
Buy RESION Deep Cast Epoxy Resin
Epoxy casting resin from RESION is easy to order at Polyestershoppen. If you order on working days before 5 pm Dutch time, your order will be shipped the same day! Would you like more information on deep cast epoxy resin? We are happy to provide advice. Get in touch by calling +31850220090 or send an email to support@polyestershoppen.com.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
EP101UV | UV Epoxy BASE | 500 gram
Safety equipment
Waarschuwing
| Code | Description |
|---|---|
| H315 | Causes skin irritation. |
| H317 | May cause an allergic skin reaction. |
| H319 | Causes serious eye irritation. |
| H411 | Toxic to aquatic life with long lasting effects. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P261 | Avoid breathing dust/fume/gas/mist/vapours/spray. |
| P273 | Avoid release to the environment. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P302+P352 | IF ON SKIN: Wash with plenty of water/… |
| P333+P313 | If skin irritation or rash occurs: Get medical advice/attention. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
| EUH205 | Contains epoxy constituents. May produce an allergic reaction. |
EP123 | Epoxyverharder UV CAST75 | 215 gr
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H318 | Causes serious eye damage. |
| H302+H312 | Harmful if swallowed or in contact with skin. |
| H411 | Toxic to aquatic life with long lasting effects. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P270 | Do no eat, drink or smoke when using this product. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P310 | Immediately call a POISON CENTER/doctor/… |
| P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
| P264A | Wash hands thoroughly after handling. |
- Mixing ratios and mixing of Epoxy and Polyester
- Casting wooden tables and table tops with Epoxy casting resin
- DIY | How to make an epoxy river table
- DIY | Epoxy coffee table with floating piece of wood
- How much epoxy do you need?
- Common epoxy problems and how to fix them
- How well can epoxy withstand UV light?
- Making a DIY tree trunk table with epoxy
- Temperature resistance of epoxy
- All about making epoxy tables | This is how you make a table with epoxy!
- Solution to epoxy problems
- Mixing epoxy using the 2-cup mixing method
- What you need to know about amine blush: the invisible enemy of epoxy resin
