Holographic coaster mould (confetti)
- Holografic mould
- Round, square, hexagon
- Contents: 125 grams
Make special epoxy coasters with this holographic silicone mould. At first glance this looks like a normal mould, but after casting a beautiful holographic effect appears in your epoxy object. The holographic effect is clearly visible in the mould and resembles a confetti pattern.
The mould is made with flexible silicone, making it easy to remove the epoxy from the mould. This way you can enjoy the holographic coaster mould several times!
Suitable epoxy resin
The use of suitable epoxy is important for the end result of your Resin Art art. Do you want to use epoxy that is very resistant to UV radiation and is very easy to process? Then choose RESION UV Resin Art Epoxy LV (low viscosity) or RESION UV Resin Art Epoxy MV (medium viscosity). Because these epoxy resins do not discolour due to UV light, you no longer need a UV stabiliser. For all epoxy resins, see the Epoxy category.
Properties
Shapes: square, round and hexagonal
Material: silicone
The coasters have a small raised edge so that your glass will not slide off!
Dimensions
- Square mould mal: 10 cm by 10 cm
- Hexagon mould: 10 cm by 10 cm
- Round mould: 8 cm by 8 cm
- Height: 1.5 cm
Approximately 125 grams of epoxy is needed for the coasters.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
