- Design your own coasters
- Silicone mould
- Easy unloading
Beautiful silicone mould to make your own coasters. This mould is high-quality and can therefore be used for multiple projects. By pouring epoxy into the mould, you make your own coasters. It is recommended to apply release agent for silicone to the mould. This makes it easier to remove the coaster from the mould.
Check out the complete coaster kit to start making your own coasters right away!
Epoxy resins and pigments
The most suitable epoxy resins for coaster moulds are RESION UV Resin Art epoxy MV (medium viscosity) or MasterCast. These epoxy resins are suitable for combining with pigments such as RESION MetalTint, RESION TransTint, Resi-Metal or Resi-Tint. In addition, we recommend the unique Chroma-Tint and Pinata alcohol ink.
Quantity: they go by the piece. Each mould contains 3 cavities to make a coaster.
Material: silicone rubber
Diameter: 10 cm
Depth: 2 cm
Weight of cast: 50 to 100 grams per coaster
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.