RESION UV Resin Art Epoxy LV
- Low viscosity
- UV stabilised
- 2:1 mixing ratio
- Suitable for jewellery etc.
RESION UV Resin Art Epoxy LV is an epoxy resin specially developed for making resin art. This epoxy is of high quality, is easy to process due to the 2:1 mixing ratio and has a very high UV stability. This makes the low viscosity (LV) epoxy universally applicable for making jewelery, orgonites, paintings, coasters and other art on all types of surfaces. Are you a starting or experienced resin art artist, then RESION UV Resin Art Epoxy LV is the epoxy resin you've been looking for! This resin is comparable to the RESION UV Epoxy.
Benefits of Resin Art Epoxy LV
- High quality transparent epoxy.
- Very high UV resistant.
- Adheres to almost all surfaces (such as wood, concrete and plastics).
- Easy in use due to a 2:1 mixing ratio.
- Low viscosity (thin spread).
- Odourless.
Low viscosity
This art epoxy has a low viscosity. This means that the epoxy resin flows thinly, which makes the resin very suitable for making Resin Art jewelery, orgonites, coasters and paintings. In addition, you can also use this epoxy to fill your own silicone moulds.
UV resistant resin art epoxy
We have extensively tested the UV Resin Art Epoxy for UV stability by testing the resin for a longer period in a special UV cabinet. This way we can guarantee that this epoxy resin is very resistant to UV radiation and will therefore not yellow. You do not need a UV stabiliser for this resin! The high UV stability also makes this Art Epoxy ideal for applications that will exposed to lots of sunlight, such as tables and jewellery.
How to use Art Epoxy LV
Using RESION Art Epoxy is very simple if you follow the following steps:
- Weigh the base component (A) and the hardener (B) well according to the mixing ratio stated on the packaging (2 parts by weight of resin on 1 part by weight of hardener).
- Mix the base component and the hardener thoroughly for 3 minutes. Also scrape well along the side and bottom of the mixing cup!
- If desired, add pigments to colour the resin.
- Apply the epoxy to the surface you will use (the pot life is 30-60 minutes at 20℃).
- After application, allow the Art Epoxy to cure for approximately 12-18 hours before it is manageable (note: it takes 3-5 days before the epoxy is fully cured).
Properties
| Unit | Resin (EP 102) | Hardener (EP 124) |
| 0.75 kg | 0.5 kg | 0.25 kg |
| 1.5 kg | 1 kg | 0.5 kg |
| 3 kg | 2 kg | 1 kg |
| 7.5 kg | 5 kg | 2.5 kg |
| 15 kg | 10 kg | 5 kg |
| 30 kg | 20 kg | 10 kg |
| 60 kg | 40 kg | 20 kg |
| 300 kg | 200 kg | 100 kg |
Mixing ratio: 2:1 (100 grams of resin, 50 grams of hardener)
Viscosity: low (approx. 700 mPa.s)
Pot life: 30-60 minutes at 20°C
Minimum processing temperature: 12°C
Dust dry: after 6-12 hours (20°C)
Manageable: after 12-18 hours (20°C)
Full curing: 3-5 days
Heat resistance: 40-45 °C
Maximum casting thickness: 2-2.5 cm
More information?
You can easily order RESION UV Resin Art Epoxy LV at Polyestershoppen.com. If you order on working days before 5 pm Dutch time, the low viscous UV epoxy will be shipped the same day! Don't forget to check out our other Resin Art products. Would you like more information about RESION UV Resin Art Epoxy LV? We are happy to advise. Please contact us by calling +31850220090, via email support@polyestershoppen.com or via our live chat.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
EP102 | UV Resin Art Epoxy LV | Basis (A) | 100 gram
Safety equipment
Waarschuwing
| Code | Description |
|---|---|
| H315 | Causes skin irritation. |
| H317 | May cause an allergic skin reaction. |
| H319 | Causes serious eye irritation. |
| H411 | Toxic to aquatic life with long lasting effects. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P261 | Avoid breathing dust/fume/gas/mist/vapours/spray. |
| P273 | Avoid release to the environment. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P302+P352 | IF ON SKIN: Wash with plenty of water/… |
| P337+P313 | If eye irritation persists: Get medical advice/attention. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
| EUH205 | Contains epoxy constituents. May produce an allergic reaction. |
EP124 | UV Resin Art Epoxy | Verharder (B) | 50 gram
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H302 | Harmful if swallowed. |
| H314 | Causes severe skin burns and eye damage. |
| H317 | May cause an allergic skin reaction. |
| H412 | Harmful to aquatic life with long lasting effects. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P260 | Do not breathe dust/fume/gas/mist/vapours/spray. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P303+P361+P353 | IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. |
| P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| P405 | Store locked up. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
- Epoxy for beginners
- Mixing ratios and mixing of Epoxy and Polyester
- Overview of casting resins
- DIY | Make your own Resin Art clocks
- DIY epoxy art | All about Resin Art!
- Common epoxy problems and how to fix them
- DIY | Making a cosplay shield
- How well can epoxy withstand UV light?
- DIY | Epoxy cast flowers
- Making Resin Art? Everything you need to know about RESION UV Resin Art Epoxy
- FAQ - Safety precautions when working with epoxy
- Solution to epoxy problems
- Mixing epoxy using the 2-cup mixing method
- What you need to know about amine blush: the invisible enemy of epoxy resin
