BILTEC Resin Infusion Catch Pot
- With vacuum gauge and valve
- Special push-through connector
- Developed for resin infusion
Aluminum overflow vessel for Resin Infusion. The resin catch pot has a transparent lid with one or more connection points for a vacuum hose. The vessel is also supplied as standard with a vacuum gauge and valve. The vacuum overflow vessel can be easily connected to a BILTEC vacuum pump.
The resin catch pot is large enough to hold a bucket to catch any excess polyester or epoxy resin that enters the vessel through the vacuum lines. In this way the vacuum pump is protected against the ingress of resin.
Properties
Type: Resin Catch Pot
Material vessel: stainless steel
Material lid: acrylic
Hose connection product side: 12 mm plug-in connector
Hose connection pump side: 10 mm hose barb
Maximum pressure: -1 bar
Capacity: 16.5 litre, 24 litre, 70 litre
| Variant | Diameter | Height | Suitable bucket |
| 16.5 litre resin catch pot | 225 mm | 270 mm | 5 litre |
| 24 litre resin catch pot | 300 mm | 300 mm | 10 litre |
| 70 litre resin catch pot | 450 mm | 450 mm | 20 litre |
Need spare parts for these BILTEC Resin Catch Pots? Please look here: BILTEC spare parts
Questions about vacuum materials?
Do you have questions about products from the vacuum materials category? Or do you need advice about certain vacuum products and techniques? Please feel free to contact our customer service, we have several specialists who are happy to help you!
Are all products in stock and ordered before 5 PM Dutch time? Then your order will be shipped the same day.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
