FERM AGM1096P (Angle Grinder)

Are you going to lay your own cast floor? Then it is very important that you prepare the surface as well as possible, because the better you prepare the floor, the better the end result will be. With the FERM AGM1096P angle grinder, you can grind large metal surfaces, tiles, concrete, and pipes! 

With the FERM AGM1096P angle grinder, you can grind large metal surfaces, tiles, concrete, and pipes! The grinder's power is 1400W, allowing you to easily grind various materials (including steel, aluminum, and stone). The angle grinder is equipped with a spindle lock, allowing you to change grinding discs safely and easily with the supplied clamping device and hex key. In addition, the angle grinder is equipped with an adjustable protective hood, which you can place in the correct position using a quick release fastener. This means you can work safely during grinding work! The AGM1096P angle grinder has a 3-meter power cable and is, thanks to this extra-long rubber cable and the adjustable soft grip, very comfortable to use.

Benefits FERM Angle Grinder

• Easy to use.
• Grinding discs are easy to change with the spindle lock.
• High comfort level due to softgrip, compact design and long cable.
• Side handle mountable in 3 positions.
• Optimal control.

Applications AGM1096P

You can use the FERM grinder for grinding, cutting and derusting the following materials:

• Large metal surfaces
• Tiles
• Concrete
• Pipes
• Aluminum
• Adhesive residues

Accessories

You can use the following Angle Grinder accessories:

• Cup wheel for removing coatings
• Cup wheel for roughing concrete
• Cup wheel for sanding tiles for epoxy primer
• Fibre disc for polyester repairs

Specifications

Power: 1400W
Voltage: 220-240V
Frequency: 50Hz
No load speed: 9.300/min
Disc diameter: 125 mm or 180 mm
Spindle: M14
Switch: lock-on
Machine weight: 3.6 kg