RESION Polyaspartic floor coating (RAL 7035)
- Install floor coating in one day
- Non-yellowing
- Available in RAL colours
With this fast-curing polyaspartic floor coating, you can apply a beautiful coating at lightning speed. This floor coating, based on aliphatic Polyaspartic, has a very fast curing time, making the floor walkable and paintable after just 3 hours. Unlike other floor systems, it is therefore possible to apply several layers in one day. Ideal when the room cannot remain unused for a long time. In addition, this Poylaspartic floor covering is characterised by its high UV resistance, making it ideal for outdoor applications, for example on a balcony or terrace.
Benefits of RESION Polyaspartic floor coating
Polyaspartic floor coating has great features. We have listed the most important ones for you:
- Fast drying formula: an important feature of Polyaspartic floor coating is its fast curing. The coating can be walked on and overcoated after just 3 hours. This means you can apply multiple layers in one day.
-
Highly durable against UV radiation: this aliphatic floor coating is highly resistant to UV radiation, meaning it does not yellow and retains its gloss. This makes the transparent floor coating ideal for outdoor use, such as on balconies and terraces.
- Resistant to plasticisers: Polyaspartic floor coating is highly resistant to plasticisers, making the coating ideal for use in garages that are subjected to light to medium loads.
- Solvent-free: Polyaspartic floor coating is free of solvents, making it safe to use.
- Easy to clean: once the floor has cured, you can clean it very easily.
Features
- Pre-coloured in colour RAL 7035 (light grey).
- Fast drying formula.
- Can be walked on and overcoated after just 3 hours.
- Aliphatic system (non-yellowing).
- Resistant to plasticisers and therefore suitable for garages.
- Suitable for outdoor applications.
- Easy to clean.
- Solvent-free.
Applications
You can use RESION Polyaspartic as a floor coating for various spaces that are subject to light to medium loads. This includes:
- Parkings or garages
- Balconies
- Hotels
- Restaurants
- Cafes
- Terraces
Instructions for use
Before you start, it is important that the substrate is pretreated with RESION WB Floor Primer. Then follow the instructions below to process RESION Polyaspartic correctly:
- Open component A and mix it well with a spiral mixer, because the pigment can sink to the bottom.
- Pour component B into component A and mix it well again until a homogeneous mass is formed. Make sure that you also mix the edges and bottom of the packaging well.
- Pour the mixture into a clean bucket and mix well again.
- Apply the polyaspartic coating with a roller or trowel. Due to the short processing time, it is recommended not to mix more product than you can process in 15 minutes.
- Optionally, sprinkle a generous amount of decorative anti-slip granules on the floor. After hardening, you can easily remove excess granules. Then finish the floor with a transparent layer of Polyaspartic.
- The cure time is highly dependent on the ambient conditions. The higher the temperature, the faster the product hardens. At a temperature of 25°C and humidity of 25%, the coating can be walked on after 1 hour.
Dew point: also watch out for condensation. The temperature of the substrate and the uncured material must be at least 3ºC higher than the dew point to prevent the risk of condensation or whitening of the finish.
Product properties
| Contents | Number of m2 | Base (FS602) | Hardener (FS612) |
| 1 kg | 4 m2 | 0.7 kg | 0.3 kg |
| 5 kg | 20 m2 | 3.6 kg | 1.4 kg |
| 15 kg | 56 m2 | 10.8 kg | 4.2 kg |
Colour: RAL 7035 (light grey)
Mixing ratio (by weight): 100:49
Mixing ratio (by volume): 100:46
Working time: 20-25 minutes (at 25°C)
Dust dry: after 45 minutes (at 20°C)
Foot traffic: after 60 minutes (at 20°C)
Slightly loadable: after 2 hours (at 20°C)
Curing time: 3 hours (at 20°C)
Consumption: 250 - 300 gr/m2
Viscosity: 320 mPa.s (at 20°C)
Persoz hardness: > 275
Density: 1.08 g/cm3
Storage: up to 12 months from production date in closed containers, stored dry between +10ºC and +30ºC.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
RESION Polyaspartic | RAL 7035 | Base (A) | 0,7 kg
Safety equipment
Waarschuwing
| Code | Description |
|---|---|
| H317 | May cause an allergic skin reaction. |
| H412 | Harmful to aquatic life with long lasting effects. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P261 | Avoid breathing dust/fume/gas/mist/vapours/spray. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P302+P352 | IF ON SKIN: Wash with plenty of water/… |
| P333+P313 | If skin irritation or rash occurs: Get medical advice/attention. |
| P362+P364 | Take off contaminated clothing and wash it before reuse. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
RESION Polyaspartic | Colored | Hardener (B) | 0,3 kg
Safety equipment
Waarschuwing
| Code | Description |
|---|---|
| H317 | May cause an allergic skin reaction. |
| H332 | Harmful if inhaled. |
| H335 | May cause respiratory irritation. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P261 | Avoid breathing dust/fume/gas/mist/vapours/spray. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P302+P352 | IF ON SKIN: Wash with plenty of water/… |
| P333+P313 | If skin irritation or rash occurs: Get medical advice/attention. |
| P405 | Store locked up. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
| EUH204 | Contains isocyanates. May produce an allergic reaction. |
