Hempel Thinner 808 (No. 3)
At a glance
- Diluent for antifouling
- Thinner 808 (No. 3)
- Contents: 750 ml
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
Hempel Thinner 808 (No. 3) is a thinner for Hempel antifouling. In addition, 808 Thinner can also be used as a thinner for tool cleaners and for Hempel 1-component topcoats.
Suitable antifouling
Hempel Thinner 808 is a suitable thinner for the following Hempel products:
- Hempel Classic Antifouling
- Hempel Hard Xtra Antifouling
- Hempel Mille NCT Antifouling
- Hempel EcoPower Cruise Antifouling
- Hempel EcoPower Racing Antifouling
Specifications
Contents: 0.75 L
Colour: colourless
Flash point: 23°C
Specific weight: 0.9 kg/L
VOC content: 870 g/L
Storage: 5°C - 35°C (in closed packaging)
Product properties
The key technical properties clearly listed in one place.
- Article number
- BOO001197
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- Thinner
-
Density describes the mass of a material per unit volume. Values may be given in g/cm³, kg/L or kg/m³; 1 g/cm³ equals 1 kg/L. For example, one litre of a liquid with a density of 1.2 kg/L weighs approximately 1.2 kg. Density helps convert between weight and volume, but it can vary with temperature.
- 0.9 kg/L
-
The conditions under which a product best retains its quality, including temperature, humidity and protection from direct sunlight. Keeping containers tightly closed is particularly important for moisture-sensitive or volatile products.
- 5-35 °C (in closed packaging)
- Net contents
- 750 ml
-
Flash point is the lowest temperature at which a liquid releases enough vapour, under specified test conditions, to ignite briefly in the presence of an ignition source. It is usually given in degrees Celsius (°C). Flash point is not the same as autoignition temperature and does not provide a complete assessment of the product's hazards.
- 23 °C
-
VOC content (volatile organic compounds) indicates the amount of these substances in a product, usually expressed in g/L (grams per litre). They may evaporate during application and drying. The value describes the composition, but actual exposure also depends on how much is used, ventilation and the application method.
- 870 g/l
Reviews
Frequently bought together
Useful additions for your project.
Often chosen
Recommended
