Often chosen
Fine Line Tape
Popular
At a glance
- For sharp paint edges
- Flexible for curves
- 3 to 19 mm wide
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
Fine Line Tape is a thin, flexible masking tape for creating sharp lines when painting and applying coatings. The tape is easy to apply and can be used to mask not only straight lines but also curves and wavy patterns. This makes the tape suitable for boats, cars and caravans, for example. Fine Line Tape is heat-resistant and easy to remove without leaving adhesive residue. In addition, paint will not bleed underneath the tape, allowing you to create clean, sharp lines with ease!
The green Fine Line Tape is available in various widths from 3 to 19 mm. Each roll of waterline tape is 55 metres long.
Benefits of Fine Line Tape
- For sharp and precise paint edges.
- Flexible for straight lines and curves.
- Paint does not bleed underneath the tape.
- Removes without leaving adhesive residue.
- Heat-resistant up to 130 °C for 30 minutes.
Specifications
Colour: green
Temperature resistant: 130°C
Width: 3, 6, 9, 12 and 19 mm
Roll length: 55 metres
Thickness: 0.137 mm
Tensile strength (nominal): 245 N/100 mm
Elongation: 150% according to ASTM D1000
Product properties
The key technical properties clearly listed in one place.
- Article number
- HUL000186
-
The tasks a product is intended for, such as laminating, casting, bonding, sealing or protecting. Products intended for the same application can differ considerably in processing, curing time and final properties.
- Masking
-
The purpose of an accessory or consumable during preparation, application or finishing, such as mixing, masking, removing trapped air or dosing. This classification helps you find tools and materials for each stage of a job.
- Tape
-
The measurement across a product from one side to the other, for example for rolls, panels or fabrics. With rolled materials, the usable width may differ from the overall width.
- 12 mm, 19 mm, 3 mm, 6 mm, 9 mm
-
The physical thickness of the supplied material, such as a panel, pad, film or foam sheet. This differs from the thickness of a liquid coating applied to a surface.
- 0.137 mm
- Length
- 55 m
-
Elongation at break indicates how much a material can stretch during a tensile test before it breaks. It is expressed as a percentage (%) of the original length. At 100% elongation, the material has doubled in length just before breaking. A high value indicates a high ability to deform, but not how much force is needed.
- 150%
-
Heat resistance describes the temperature a material can withstand after correct processing and curing, usually expressed in degrees Celsius (°C). Continuous exposure is different from a brief temperature peak, and mechanical loading may also affect the limit. Heat resistance is not the same as the temperature at which the product can be applied.
- Up to 130 °C (for 30 minutes)
Reviews
Frequently bought together
Useful additions for your project.
Recommended
