HPX 6200 Repair Tape
At a glance
- High quality cloth tape
- Very high adhesive strength
- Waterproof and weather resistant
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
HPX 6200 Repair Tape is a very strong universal high quality cloth tape with high adhesive strength. The high quality repair tape is suitable for securing and repairing pipes, tubes, cracks, garden hoses, etc. HPX 6200 is very easy to use and can be torn off by hand in both directions. HPX Repair Tape is waterproof and weather proof, so you can also use the tape outdoors or on the water. This tape may therefore should not be missing on your boat!
Benefits of HPX 6200 Repair Tape
- Very strong, high quality cloth tape.
- High adhesive strength.
- Hand tearable.
- Waterproof and weather resistant.
Specifications
Colour: black
Adhesive: natural rubber
Carrier: PE coated cloth
Maximum temperature: 60°C (up to 80°C for short periods)
Tensile strength: 183 N/25 mm
Adhesive strength: 13 N/25 mm
Width: 48 mm
Length: 25 m
Thickness: 0.30 mm
Product properties
The key technical properties clearly listed in one place.
- Article number
- HUL001105
-
The measurement across a product from one side to the other, for example for rolls, panels or fabrics. With rolled materials, the usable width may differ from the overall width.
- 48 mm
-
The physical thickness of the supplied material, such as a panel, pad, film or foam sheet. This differs from the thickness of a liquid coating applied to a surface.
- 0.3 mm
-
The backing material that supports a functional layer, such as paper or fabric behind abrasive grains or film behind an adhesive coating. The backing affects flexibility, tear resistance and suitability for wet or dry use.
- Fabric with PE coating
- Length
- 25 m
-
Tensile strength is the maximum tensile stress a material can withstand during a tensile test before failure. It is usually expressed in MPa (megapascals) or N/mm² (newtons per square millimetre); 1 MPa = 1 N/mm². Under comparable test conditions, a higher value means greater resistance to tension. In composites, fibre orientation also affects the result.
- 183 N/25 mm
-
Heat resistance describes the temperature a material can withstand after correct processing and curing, usually expressed in degrees Celsius (°C). Continuous exposure is different from a brief temperature peak, and mechanical loading may also affect the limit. Heat resistance is not the same as the temperature at which the product can be applied.
- Up to 60 °C (short-term up to 80 °C)
Reviews
Frequently bought together
Useful additions for your project.
Popular
