Farécla G3 Pro Rapid Detailer
At a glance
- Mild reinigingsproduct
- Voor het gehele exterieur
- OP=OP
Farécla G3 Pro Rapid Detailer effortlessly gives your car a refreshed, freshly waxed look. Thanks to its improved formula, the cleaner effectively removes stubborn stains and dirt. It leaves a streak-free, silky-smooth, high-gloss finish without removing previously applied wax. It also creates a protective layer on gloss, satin and matt finishes.
Farécla G3 Pro Rapid Detailer is suitable for bodywork, headlights, windows, dashboards, and plastic and rubber trim.
Benefits of G3 Pro Rapid Detailer
- Mild cleaner and wax to remove light dirt.
- Immediately gives paintwork a high-gloss finish.
- Cleans gelcoats, painted surfaces, glass, plastics, rubber, chrome and more.
- The gentle formula does not affect previously applied wax.
Applications
Because of its gentle cleaning action, Farécla G3 Pro Rapid Detailer is suitable for paintwork as well as many other exterior materials, including plastic, chrome and glass. One product is all you need to clean your car's entire exterior. It is ideal for keeping your car looking like new between full washes.
Instructions for use
Farécla G3 Pro Rapid Detailer is easy to use. Follow the instructions below for the best results:
Light dirt
- Spray a light mist onto the surface.
- Use a microfibre cloth to spread the product and clean the surface. Remove polishing residue, adhesive marks, streaks, etc.
- Buff the surface with a clean cloth.
Heavy dirt
- After washing the surface, spray Rapid Detailer 2.0 onto both the surface and the clay mitt.
- Gently rub the mitt over the surface using light pressure, without allowing the product to dry.
- Wipe away any remaining residue with a soft, clean, dry microfibre cloth using gentle circular motions. The surface should now feel smooth.
Specifications
Contents: 500 ml
Colour: opal
pH: 8.7
VOC content: 0 g/L
Silicones: none
Article number: 7193
Product properties
The key technical properties clearly listed in one place.
- Article number
- POL002373
-
pH indicates how acidic or alkaline an aqueous solution is and has no unit. A pH of around 7 is neutral; lower values are acidic and higher values are alkaline. The scale is logarithmic: a difference of one pH unit represents approximately a tenfold difference in acidity. pH alone does not fully describe the hazards of a product.
- 8.7
- Net contents
- 500 ml
-
VOC content (volatile organic compounds) indicates the amount of these substances in a product, usually expressed in g/L (grams per litre). They may evaporate during application and drying. The value describes the composition, but actual exposure also depends on how much is used, ventilation and the application method.
- 0 g/L