Farécla G3 Regular Grade Paste Compound
At a glance
- High gloss system
- Permanent finish
- Silicone-free
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
The trusted Farécla G3 Regular Grade Paste Compound in a new look! Easily remove scratches and imperfections from paint with this paste compound. Also suitable for restoring oxidized paint to its original glossy finish.
This paste is a silicone-free, coarse-cutting compound that permanently, quickly, and easily removes sanding scratches from P1500 grit and finer on High-solid and Medium-solid paints — all without temporary fillers. It also restores oxidized paints and leaves a smooth, polished finish.
Features of Farécla G3 Paste Compound
- Removes sanding scratches from P1500 and finer.
- Bodyshop safe (no silicones).
- No fillers.
- For Medium-solid and High-solid paints.
- Familiar Farécla product with a new look.
Which polishing pad do I need?
You can easily use this polishing compound with the following polishing pad:
How do I use Farécla G3 Regular Grade Paste Compound?
Farécla G3 Regular Grade can be applied both by hand and machine. For machine use on cars, it works best with the yellow Farécla G Mop polishing pad. For manual application, use a polishing cloth. The G3 paste compound is not water-based, so it cannot be used dry.
- Thoroughly wet the surface and the polishing pad with water.
- Stir or knead the paste well.
- Apply a small amount of paste to the polishing pad and the surface.
- Spread the paste evenly over the surface before turning on the machine.
- Polish the surface at 1500–1800 rpm.
- Wipe the surface clean afterwards with a polishing cloth.
Properties
Contents: 250 gr, 400 gr, 1 kg, 3 kg
Viscosity: high
Colour: white
VOC content: 177 g/L
pH value: 9-10
Product properties
The key technical properties clearly listed in one place.
- Article number
- POL001690
- Polishing compounds
- Grof polijstmiddel
-
The manufacturer's range or series to which the product belongs. Products in the same range are often designed to work together, but may differ in composition, processing and intended use.
- G3
-
pH indicates how acidic or alkaline an aqueous solution is and has no unit. A pH of around 7 is neutral; lower values are acidic and higher values are alkaline. The scale is logarithmic: a difference of one pH unit represents approximately a tenfold difference in acidity. pH alone does not fully describe the hazards of a product.
- 9-10
- Net contents
- 1 kg, 250 g, 3 kg, 400 g
-
Viscosity measures how easily a liquid flows, or how thick it is. Dynamic viscosity is usually expressed in mPa·s (millipascal-seconds), sometimes in cP (centipoise); 1 mPa·s = 1 cP. A lower value usually means a more free-flowing liquid, while a higher value indicates a thicker product. Temperature and test method strongly affect the value. Note that mPa·s is different from MPa, which is used to express mechanical strength.
- High
-
VOC content (volatile organic compounds) indicates the amount of these substances in a product, usually expressed in g/L (grams per litre). They may evaporate during application and drying. The value describes the composition, but actual exposure also depends on how much is used, ventilation and the application method.
- 177 g/L
Reviews
Frequently bought together
Useful additions for your project.
