300 gr/m2 fibreglass woven roving



- Affordable glass fabric
- Process with polyester or epoxy
- Approx. 0.5 mm layer thickness
Fibreglass woven roving is a type of glass fabric for coarse work. With glass roving fabric you build up layer thickness very quickly, which is ideal when a thick laminate with high strength is desired. Roving fabric is one of the cheaper glass fabrics and is used for processing flat or slightly curved surfaces.
With 300 gr/m2 fibreglass woven roving you build up a laminated layer thickness of about 0.5 mm (resin consumption is about 450 g/m2). The fabric type is suitable for use in combination with polyester resin, epoxy resin and vinylester resin.
Benefits of fibreglass woven roving
- Builds up layer thickness quickly (approx. 0.5 mm).
- Most economical glass fabric.
- Suitable for epoxy, polyester and vinylester.
- Suitable for flat or slightly curved surfaces.
Specifications
Application method | Layer thickness | Resin consumption |
Hand lay-up | 0.55 mm | approx. 434 gr/m2 |
Wet Bagging | 0.33 mm | approx. 214 gr/m2 |
Vacuum injection | 0.32 mm | approx. 205 gr/m2 |
Weight: 300 gr/m2
Weave type: square weave
Width: 125 cm
Compatible with: polyester resin, vinylester resin, epoxy resin
Packaging:
- 1 lm: 125 cm x 1 lm (1.25 m2)
- 5 lm: 125 cm x 5 lm (6.25 m2)
- 20 lm: 125 cm x 5 lm (25 m2),4 pieces, folded
- 20 lm: 125 cm x 20 lm (25 m2), roll-packed
- Roll: 125 cm x 130 lm (approx. 160 m2)
Suitable for: floors, boat hulls, walls etc.
Delivery: folded in a bag or rolled in a tube
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.