Epifanes Waterline Paint
At a glance
- 1-component yacht paint
- 6 standard colours
- High-gloss finish
Epifanes Waterline Paint is a single-component high-gloss lacquer specially developed for painting the waterline. This coating offers excellent resistance to water and weathering, provides long-lasting gloss retention and is known for its outstanding exterior durability. The waterline paint is supplied in a 250 ml tin and is available in six standard colours.
Epifanes Waterline Paint can be applied over existing paint systems above the waterline on wood, steel, polyester and aluminium, regardless of the brand of the underlying coating.
Specifications
Contents: 250 ml
Gloss: high gloss
Colour: white, light blue, dark blue, bright red, black, green
Recommended film thickness: 80 - 90 µm wet = 40 - 45 µm dry
Coverage: 15m2 per litre (3-4m2 per 250 ml)
Thinner: Epifanes Brush Thinner
Application: brush or roller
Dust dry: 4 hours (20°C)
Sandable/recoatable: 24 hours (20°C)
Density: 0,95 - 1,30 gr/cm3 depending on colour
VOC-level: 371 gr/litre
Application temperature: 10°C - 28°C
Shelf life: in closed unopened container stored in a dry room at temperatures between 5°C en 30°C. approx. 3 years
Product properties
The key technical properties clearly listed in one place.
- Article number
- LAK002316
-
Gloss level indicates how much light a dry paint or coating reflects and how the finished surface looks.
- Matt: little reflection and a subdued appearance.
- Satin: a gentle sheen between matt and high gloss.
- High gloss: stronger reflections and a more pronounced colour, although surface imperfections may become more visible.
Gloss can be measured in gloss units (GU) at a specified angle. Terms such as matt and satin do not necessarily mean exactly the same thing across manufacturers. Substrate condition and application also affect the final appearance.
- High gloss
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- 1K paint
-
The recommended layer thickness is the thickness at which you apply each coat of paint, coating or resin. It is usually given in micrometres (µm) or millimetres (mm).
- Wet film thickness: the thickness immediately after application.
- Dry film thickness: the thickness after drying or curing.
For a coating with 60% solids by volume, a wet film of 100 µm will theoretically produce a dry film of approximately 60 µm. Film thickness affects coverage, protection and drying. Always check whether the manufacturer specifies wet or dry film thickness.
- 80-90 µm wet (= 40-45 µm dry)
-
The recommended application temperature range indicates the conditions under which the product can generally be applied and cured properly. Three temperatures matter:
- Air: the temperature in the workshop or outdoors.
- Substrate: the temperature of the surface being treated.
- Product: the temperature of the resin, adhesive or coating itself.
A cold substrate can cause condensation and affect adhesion. At higher temperatures, two-component products may react faster, reducing their working time. Check the dew point and follow the product instructions.
- 10-28 °C
-
Density describes the mass of a material per unit volume. Values may be given in g/cm³, kg/L or kg/m³; 1 g/cm³ equals 1 kg/L. For example, one litre of a liquid with a density of 1.2 kg/L weighs approximately 1.2 kg. Density helps convert between weight and volume, but it can vary with temperature.
- 0.95-1.3 kg/L
-
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
- At least 36 months
-
A paint or varnish layer is dust-dry when settling dust is less likely to stick to the surface. It may not yet be touch-dry, ready for overcoating or suitable for loading; these are different stages of drying and curing.
- 4 hours (20 °C)
-
Consumption or coverage describes how much product is needed for a given surface area. Consumption may be stated in g/m² or kg/m², while coverage is often given in m²/L or m²/kg. A consumption of 0.2 kg/m² means a theoretical 200 grams per square metre. Actual use depends on film thickness, substrate absorbency, application method and waste.
- 15 m²/L
-
A specific thinner that can be used, where permitted, to adjust a product's application properties or viscosity. The correct thinner and maximum quantity depend on the product. Incorrect thinning can affect coverage, drying and curing.
- Epifanes Paint Thinner
- Net contents
- 250 ml
-
The application or processing methods specified by the manufacturer, such as brushing, rolling, spraying, casting or hand laminating. The chosen method can affect consumption, layer thickness and finish.
- Brush, Roller
-
VOC content (volatile organic compounds) indicates the amount of these substances in a product, usually expressed in g/L (grams per litre). They may evaporate during application and drying. The value describes the composition, but actual exposure also depends on how much is used, ventilation and the application method.
- 371 g/L
Reviews
Frequently bought together
Useful additions for your project.