Araldite 2012-1 Epoxy Adhesive

View reviews

At a glance

Strong 2-component epoxy adhesive
Quick-curing
In handy double syringe

Not sure about your choice?

Want to know which Araldite adhesive you need? Use our selection tool!

Fast delivery throughout Europe

Secure payment with PayPal, Mastercard, Visa and more

4.7 out of 5 stars on Trusted Shops

Araldite 2012-1 is the successor to Araldite 2012. Due to new European regulations, the manufacturer has updated this adhesive to a CMR- and BPA-free formulation. The properties, processing, and performance of the adhesive remain identical to those of the previous version. An equivalence report can be found under the 'documents' tab.

Araldite 2012-1 is the faster-curing version of Araldite 2011. This two-component epoxy adhesive has a low viscosity, cures quickly and provides a strong, resilient bond. Thanks to its excellent adhesion to a wide range of materials, Araldite 2012-1 is suitable for most industrial applications, including metals, plastics, ceramics, glass and rubber.

Note: this is the non-aero version of Araldite 2012. If you’re looking for the variant suitable for aerospace applications, please contact our customer service team.

Features of Araldite 2012-1 epoxy adhesive

Fast curing and high strength.
Low shrinkage and excellent impact resistance.
Strong and resilient.
Bonds a wide variety of materials.

Applications

Araldite 2012 is suitable for bonding the following materials:

Ferrous metals and aluminium, copper, zinc and galvanised steel.
Polystyrene/polyurethane foams.
Ceramics, wood, fibre-reinforced plastics and epoxy resins.
Fibre-reinforced polyester and thermoset composites, acrylics and polycarbonate.
Rubbers and glass/quartz/gemstones.
Excellent for use with dynamic loads.
Bearings, electronic components and printed circuit boards.
Encapsulation of sensors.
Grinding stones.

Specifications

Colour: yellow
Mixing ratio: 1:1
Specific gravity: 1.05 g/cm³
Shear strength: 19 N/mm²
Peel strength: 5 N/mm
Viscosity: 35.000 mPa.s
Gap-filling capacity: up to 1 mm
Temperature resistance: -60 °C to +100 °C
Minimum curing time for initial strength: 20 minutes for 1 N/mm² on aluminium at 23 °C
Packaging:

50 ml cartridge (application gun and mixing nozzles required)
200 ml cartridge (application gun and mixing nozzles required)

Application gun:

Mixing nozzles:

Araldite 2012-1 is quick and easy to apply using the appropriate application gun and mixing nozzles.

Product properties

The key technical properties clearly listed in one place.

Article number: LIJ000193
: Epoxylijm
: 1mm tot 2mm
Colour: Lichtgeel
: 1 tot 10 minuten
: Staal, Roestvast staal (RVS), Aluminium, Koper, Messing, Glas/Epoxy (GRE), Koolstof/Epoxy (CFRP), Keramiek, Glas, Hout
: 20 minutes (for 1 N/mm² on aluminium at 23 °C)
: 5 N/mm
: 19 MPa
: 1.05 kg/L
Net contents: 50 ml
: 35.000 mPa·s
: -60 to 100 °C

Safety information

Read the warnings and use appropriate protective equipment before handling the product.

Waarschuwing

Recommended protective equipment

Hazard pictograms

Warnings and precautions

H315 Causes skin irritation.

H317 May cause an allergic skin reaction.

H319 Causes serious eye irritation.

H411 Toxic to aquatic life with long lasting effects.

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

P264 Wash hands thoroughly after handling.

P273 Avoid release to the environment.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P391 Collect spillage.

P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

P337+P313 If eye irritation persists: Get medical advice/attention.

EUH205 Contains epoxy constituents. May produce an allergic reaction.

Reviews

Useful additions for your project.

Mixing nozzle A

€ 1,⁰⁹

inc. VAT

Application gun LS50-1

€ 32,⁹⁸