SCIGRIP SG300-15 Methacrylate Adhesive
At a glance
- Strong bond strength
- No primer required
- Impact and fatigue resistance
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
SCIGRIP SG300-15 is a two-component methacrylate adhesive for bonding metals, composites and plastics. The methacrylate adhesive (MMA) cures rapidly, offers excellent chemical resistance, and is extremely impact- and fatigue-resistant.
In most cases, SCIGRIP SG300 adhesive does not require surface preparation. A primer is therefore not necessary. However, ensure that the surface is clean, grease-free, and free from oil. For more technical properties, please refer to the SCIGRIP SG300 technical documentation.
Tip: make sure to order an application gun and the correct mixing nozzles.
Benefits of SCIGRIP SG300-15
- Strong bond strength.
- No primer needed.
- Excellent impact and fatigue resistance.
- Excellent resistance to most chemicals.
Applications
SCIGRIP SG300 is suitable for bonding to the following materials:
- Epoxy
- Polyester and vinyl ester
- Gelcoats
- Aluminium
- Carbon fibre
- Stainless steel
- Metal
- ABS
- PVC
- Acrylic
Specifications
Type: SG300-15
Colour: black
Mix ratio: 10:1
Fixture time: 13-17 minutes
Clamp time: 30-40 minutes
Packaging:
- 50 ml cartridge (requires application gun and mixing nozzles)
- 490 ml cartridge (requires application gun and mixing nozzles )
Application gun:
Mixing nozzles:
Product properties
The key technical properties clearly listed in one place.
- Article number
- LIJ001377
-
Adhesive type describes the family of adhesive or sealant, such as epoxy adhesive, (methyl)methacrylate adhesive, polyurethane adhesive or polymer sealant. Its chemistry affects processing, curing, flexibility and adhesion. Products of the same type may still differ, so check the suitable substrates and application instructions.
- Methyl Methacrylaatlijm
- Colour
- Zwart
-
Open time is the period during which an applied adhesive, sealant or mortar can still be assembled, positioned or adjusted. It is usually given in minutes under specified conditions, often around 20 or 23 °C. Open time generally starts at application and may differ from the working time after mixing.
- 10 tot 30 minuten
-
This property lists the substrates on which an adhesive, resin or coating can achieve strong adhesion according to the product information. The result also depends on surface preparation.
- Cleaning and degreasing: removes dirt, oil and other substances that interfere with bonding.
- Sanding or roughening: can improve adhesion when suitable for the substrate.
- Primer: required or recommended for some surfaces.
Materials such as PE, PP and PTFE are difficult to bond with many conventional adhesives and may need a specialist adhesive or pretreatment. If in doubt, test adhesion on a small area.
- Glas/Epoxy (GRE), Polyester (FRP), Aluminium, Koolstof/Epoxy (CFRP), Roestvast staal (RVS), Staal, ABS, PVC
-
Initial strength is the strength an adhesive joint develops shortly after the parts are joined. For some adhesives, the specification gives the time needed to reach a certain strength, for example 20 minutes to reach 1 N/mm² on aluminium at 23 °C. N/mm² (newtons per square millimetre) measures stress and is equivalent to MPa. The joint may not have reached its final strength at that point.
- 30-40 minutes
-
Mixing ratio indicates how much of each component is needed, for example resin (A) and hardener (B). A ratio of 100:50 by weight means 100 grams of A to 50 grams of B; by volume you might use millilitres. Weight and volume ratios are not necessarily the same because the components may have different densities. Accurate measuring is important for proper curing.
- 10:1 (by volume)
- Net contents
- 490 ml, 50 ml
-
Working time is the period during which a product remains workable after mixing or activation, usually given in minutes at a specified temperature, often 20 °C. With reactive resins, the chemical reaction also continues in the mixing container, and larger quantities or higher temperatures can shorten this time. Working time is different from gel time and full curing time.
- Approximately 13-17 minutes
Reviews
Frequently bought together
Useful additions for your project.
